Overview
The Mickey Thompson Classic III 17×9 wheel in polished aluminum, part number M/T90000001782, has a 5 on 5.5 bolt pattern, a 106 center bore, a -12 offset and 4.5 backspacing. It is a universal fit wheel, so the bolt pattern, center bore and offset decide whether it suits your truck or Jeep.
The face is highly polished, with polished hand holes that match. The Classic III is a truck wheel with a high load rating, backed by a limited lifetime warranty and the brand’s M/T stamp of quality.
Key features
- Highly polished face with matching polished hand holes
- High load rating
- Aluminum construction
- Limited lifetime warranty
- M/T stamp of quality
Caring for polished aluminum
A polished face shows scratches, water spots and brake dust more readily than a painted or clear-coated face. Clean it with a pH-neutral wheel cleaner and a soft cloth, and rinse thoroughly after each trail outing so grit does not sit in the hand holes. Avoid steel brushes and abrasive pads, which leave fine lines that dull the shine over time.
Polished wheels are easy to inspect, so look at the lip, spoke edges and bead area each time you service the tires. Small dents and pitting are easier to spot on a bright surface, and they should be checked before the wheel returns to heavy use. Keep the mounting surface clean and free of corrosion so the wheel seats evenly against the hub.
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000001782 |
| Style | Classic III |
| Finish | Polished |
| Construction | Aluminum |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 106 |
| Offset | -12 |
| Backspacing | 4.5 |
Vehicle fitment
This wheel is a universal fit, which means it is not matched to a single year, make or model. Compare its 5 on 5.5 pattern, 106 center bore and -12 offset with your hub and wheel well clearance.
Caps are unavailable on certain older applications, such as 1997 and earlier Toyota Land Cruisers and 1986 and earlier Jeep CJs, plus 2002 and earlier Dodge/Ram 3/4 and 1-ton pickups. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the wheel on your hub with the 5 on 5.5 pattern and 106 bore before tightening any lug nuts, and check that the -12 offset leaves room for your brakes.
What’s included
The package is the wheel only. It does not include a center cap or lug nuts.
Not included: Tires are not part of this wheel listing.









