Overview
The Method Race Wheels MR610 Con 6 in 20×12 matte black, part MRWMR61021260552N, is the third wheel in Method’s 600 Series. It is a 6 on 5.5 bolt pattern wheel with a concave face, and Method built it to push the concave look of the MR310 further.
With a -52 offset and 4.5 inch backspacing, the 20×12 has virtually no lip, so the concave face sits deep. The look is pronounced once the wheel is mounted on lifted vehicles. The Street-Loc lip is the v.2 design, with removable stainless steel bolts all around.
Key features
- Concave face with virtually no lip on the 20×12 size
- Street-Loc v.2 lip with removable stainless steel bolts all around
- Bolt-on aluminum center cap with snap-in cap for 5 and 6 lug applications
- Clean Method debossed logo in one of the six spokes
- Matte black finish; the design is also offered in Bronze with a Matte Black lip
Concave wheels on lifted trucks
A concave face with almost no lip makes the wheel look deep and wide from the outside. The face sits further outward on a -52 offset, which changes how the wheel relates to the fender and the brake caliper. Measure that gap with the tire installed, not with the bare wheel, because the tire’s bulge changes the reading.
Ride quality is the other consideration. Lifted vehicles carry more suspension travel and sometimes less damping stability at speed. A wide, concave wheel adds weight at the outer edge, so balance the assembly carefully and check that the steering and control arms still move freely through full travel. Heavier tires increase rotating mass, which can affect braking and fuel use.
- Check fender clearance at full compression
- Keep tire pressure consistent across all four wheels
- Inspect the snap-in cap after washing or trail use
- Look for rubbing on the inner liner during hard turns
Specifications
| Brand | Method Race Wheels |
|---|---|
| Model | MR610 Con 6 |
| Part number | MRWMR61021260552N |
| Wheel diameter | 20 inches |
| Wheel width | 12 inches |
| Bolt pattern | 6 on 5.5 |
| Offset | -52 |
| Backspacing | 4.5 |
| Style | MR610 Con 6 |
| Lip type | v.2 Street-Loc with removable stainless steel bolts |
| Spokes | Six |
| Finish | Matte Black |
| Construction | Aluminum |
| Center cap | Bolt-on aluminum with snap-in cap for 5 and 6 lug |
Vehicle fitment
No vehicle is named for this wheel, and it is universal fit. Match the 6 on 5.5 bolt pattern and -52 offset to your vehicle before mounting, and confirm the fit against your year, model and trim, since a 20×12 concave face changes how far the wheel sits outward.
The snap-in center cap belongs to 5 and 6 lug applications; 8 lug applications use a separate bolt-on piece.
Installation notes
The face is concave with virtually no lip, so check fender and suspension clearance on a lifted vehicle once the tire is mounted. Keep the snap-in cap with the bolt-on center cap during mounting, and have a shop mount and balance the tire.
What’s included
Included: the bolt-on aluminum center cap with its snap-in cap, and the removable stainless steel bolts around the v.2 Street-Loc lip.
Not included: tires.










