Overview
The Method Race Wheels MR312 measures 17 by 8.5 inches and carries a 6 on 135 bolt pattern. Its part number is MRWMR31278516500 and the finish is Matte Black. Method markets it as a street wheel for everyday driving and weekend off-road use, and assigns it Universal Fit for trucks, Jeeps and SUVs in general.
The design draws on the 106 Beadlock. The concave split-six spoke face carries a debossed Method name on one spoke, and the v.3 Stree-Loc ring sits at the lip with removable stainless steel bolts. Match the 6 on 135 pattern, 0 offset and 87 center bore to your own hub and axle before mounting.
Key features
- Split-six spoke face, concave, with a Method debossing on one spoke
- All-new v.3 Stree-Loc ring
- Stainless steel lip bolts can be removed and resist shearing
- Matte Black finish with aluminum construction
- 17 by 8.5 inch size on a 6 on 135 bolt pattern
- Bolt-on center cap with hardware
Before you buy
A 17 inch wheel changes how the tire sits in the fender and how much room the brake calipers get, so overall fit matters as much as the finish. Start with the hub: bolt pattern and center bore decide whether the wheel mounts square and runs true. Daily driving and trail use load the spokes and lip differently, so keep the tire load rating in mind when pairing tires with this wheel.
Aluminum split-spoke wheels clean up well, but brake dust and road salt can dull a matte face over time. Rinse with mild soap and avoid harsh solvents on the finish. After curb or rock contact, inspect the lip for scrapes or bends, since a damaged lip can affect the tire seal and balance.
- Confirm the hub bore before ordering
- Check tire diameter against fender clearance
- Recheck lug nut torque after the first drives
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31278516500 |
| Series | MR312 |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Split Spoke |
| Finish | Matte Black |
| Construction | Aluminum |
Vehicle fitment
The wheel is Universal Fit, so it is not built for one specific truck, Jeep or SUV. Check the 6 on 135 bolt pattern, 0 offset and 87 center bore against your vehicle before choosing it.
Universal Fit does not confirm clearance for any single model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Backspacing measures from the mounting face to the inner lip, so a 4.75 figure shows how much room sits behind the wheel. Check that the 87 center bore suits your hub before fitting. Fit the bolt-on center cap with the hardware provided. A 0 offset changes how the wheel sits relative to brake calipers and suspension, so check clearance once the tire is on.
What’s included
The package includes a bolt-on center cap with hardware. Confirm your tire and lug nut needs before ordering.










