Overview
The Method Race Wheels 308 Roost 18×9 is a bronze spoke wheel with a 5 on 150 bolt pattern and part number MRWMR30889058918. Its listed offset is 18 with 5.75 backspacing, and the center bore is 111.
Method Race Wheels designs its wheels around intended use and checks them with finite element analysis and field testing. The 308 Roost line is aimed at off-road use. It is a universal-fit wheel, so no make, model or year is confirmed for it.
Key features
- 18-inch diameter and 9-inch width
- Bronze finish
- Offset 18 and backspacing 5.75
- Center bore of 111
- Aluminum spoke construction in the 308 Roost series
- Designed for off-road use per the manufacturer
Choosing and mounting a spoke wheel
Off-road wheels take repeated impacts from rocks, ruts and washboard roads, so the spokes and mounting face see more stress than they do on pavement. Regular inspection helps catch problems early. After the first few trail runs, check the lug nuts for proper torque and look around each spoke for hairline cracks or bent edges near the lip. Note any new vibration on the highway, since it can point to a bent edge or a loose mounting surface.
Tire choice affects how the wheel performs. A wider or taller tire changes the rolling diameter and can shift how the offset sits in the fender, so re-check clearance whenever the tire changes. Pair the wheel with a load-rated tire suited to your vehicle’s weight and typical use, and keep the bead seat clean at every mounting.
- Clean the bead seat and mounting face before fitting a new tire
- Check the spokes after hard landings or rock strikes
- Re-torque lug nuts after the first few drives
- Replace a wheel that shows cracks, bends or air loss
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30889058918 |
| Series | 308 Roost |
| Style | Spoke |
| Finish | Bronze |
| Construction | Aluminum |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 150 |
| Center bore | 111 |
| Offset | 18 |
| Backspacing | 5.75 |
| Fitment | Universal fit |
Vehicle fitment
No individual vehicles are fitted to this wheel. As a universal-fit wheel, the 5 on 150 pattern and 111 center bore must match the hub.
A positive 18 offset moves the mounting face relative to the hub, so check clearance on the vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure brake caliper and fender clearance with the 18×9 wheel mounted, before driving the vehicle at speed.
What’s included
This entry covers the wheel only.
Not included: Tires and lug hardware are sold separately.










