Overview
This 17×7.5 wheel is matte black, drilled 5 on 108, with part number MRWMR70177549530. Method aims it at off-road racers and trail drivers. It is Universal Fit, so no specific vehicle is named.
The wheel is cast in one piece from 356 aluminum and T6 heat treated. Its patent pending Bead Grip design is meant to keep the tire seated at lower air pressures. The reinforced inner lip comes from race wheel design, and Finite Element Analysis and field testing were used to reduce weight while adding strength.
A 30 offset puts the mounting face outboard of a zero offset wheel, and 5.5 backspacing measures from that face to the inner rim edge. The 64 center bore must suit your hub so the wheel is centered correctly.
Key features
- Bead Grip design meant to hold the tire bead at lower air pressures
- Reinforced inner lip from Method’s race wheel design
- Safety humps on the inner and outer bead seats aimed at preventing de-beading
- One-piece cast aluminum with T6 heat treatment
- Windowed style, 17 inch diameter, 7.5 inch width, matte black finish
Trail driving and tire pressure
Trail driving puts side loads on the wheel and tire through rocks and ruts. The offset and backspacing determine how far the tire sits from the suspension, so check for contact after any suspension change. A wheel with a 30 offset sits farther outboard than a zero-offset wheel, so the outer edge of the tire can meet fender flares sooner.
Bead Grip is meant for lower air pressures, but pressure should always match the tire’s load and the terrain. Recheck the bead seating after airing down and again before highway speeds. Use a tire gauge rather than estimating pressure.
Related parts that are often replaced alongside this wheel include lug nuts and valve stems. Wheel spacers are only needed when clearance requires them. Inspect the spokes and window openings after rough trail runs.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70177549530 |
| Series | MR701 Bead Grip |
| Style | Windowed |
| Finish | Matte Black |
| Construction | Aluminum |
| Wheel diameter | 17 Inches |
| Wheel width | 7.5 Inches |
| Bolt pattern | 5 on 108 |
| Center bore | 64 |
| Offset | 30 |
| Backspacing | 5.5 |
| Fitment | Universal Fit |
Vehicle fitment
Method lists Universal Fit, so this wheel is not tied to a year, make, model or trim. Match the 5 on 108 bolt pattern and 64 center bore to your hub, then check the 30 offset and 5.5 backspacing for clearance.
Vehicles outside the bolt pattern and offset listed here should not be assumed to fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Before mounting, check the 5 on 108 bolt pattern, 64 center bore and 30 offset against your hub, and make sure the 5.5 backspacing clears brake calipers and suspension parts.
What’s included
Only the wheel is covered here. Check the package for lug nuts, center caps and tires before mounting.















