Overview
The Method Race Wheels 305 NV in 18×9 and Black is an aluminum windowed wheel with a 6 on 5.5 bolt pattern and part number MRWMR30589060512N. It is 9 inches wide with an 18-inch diameter, a center bore of 108, an offset of -12 and a backspacing of 4.5.
A negative offset moves the mounting face outboard, so the wheel sits further out than a positive-offset wheel of the same pattern. The 305 NV is engineered for its intended use and developed with finite element analysis and field testing. Confirm clearance on your vehicle before fitting.
Key features
- Black finish on a windowed design
- Aluminum construction
- 6 on 5.5 bolt pattern with a 108 center bore
- Negative offset of -12 and backspacing of 4.5
- Member of the MR305 NV series
Negative offset effects
A negative offset places the mounting face further outboard, so the wheel sits farther out from the hub than a positive-offset wheel of the same width. That pushes the tire toward the fender edge and changes how the steering knuckle, control arm and brake parts see the load. Anyone running this wheel should look at the fender liner, the outer edge of the tire and the full steering lock before the first drive.
Backspacing works alongside offset. A 4.5 backspacing gives the inner barrel a specific amount of room behind the mounting face, so brake calipers and suspension components need a close look. Keep the tire size and sidewall height in mind, because a taller or wider tire can shift the clearance picture more than the wheel alone.
Once mounted, recheck lug nut torque after the first few drives and inspect the wheel face and barrel for rubbing marks.
- Check fender clearance at full steering lock
- Inspect brake caliper clearance with the tire you plan to run
- Recheck lug nut torque after the first few drives
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30589060512N |
| Series | MR305 NV |
| Style | Windowed |
| Construction | Aluminum |
| Finish | Black |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -12 |
| Backspacing | 4.5 |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. A -12 offset and 4.5 backspacing change how the wheel sits against suspension and fender, so check those clearances first.
Wheels in this series with a 6 on 5.5 pattern and other offsets, such as the 0 or 18 options, are separate products and are not covered here.
Installation notes
A negative offset can change steering, suspension and fender clearance. Check the planned tire size against those parts, and confirm the 108 center bore and 6 on 5.5 pattern match the hub before mounting.
What’s included
Check the package contents against your installation before starting.
Not included: Tires, since the entry describes only the wheel.











