Overview
The Method Race Wheels MR315 17×8.5 is a 17-inch aluminum off-road wheel with an 8 on 170 bolt pattern and part number MRWMR31578587300. It has a windowed design, a machined finish, an 8.5-inch width, 0 offset and 4.75 backspacing. It is a single wheel.
Method Race Wheels built the MR315 series for off-road racing. Each wheel is engineered with Finite Element Analysis and checked in field tests, and the design aims to reduce weight while adding strength. Check the bolt pattern, width, offset and backspacing against your hub and clearance before mounting.
Key features
- Windowed MR315 series design in a 17 inch diameter
- Aluminum construction with a machined finish
- 8.5 inch wide wheel with 0 offset and 4.75 backspacing
- 8 on 170 bolt pattern with a 131 center bore
- Design checked with Finite Element Analysis and field testing
- Designed for less weight and more strength
Valve stems and tire fitting
Valve stems are a small part with a big role in tire pressure. Rubber stems can crack from heat, UV and age, while metal stems resist that better but need a tight seal at the rim. When the tire is mounted, check that the stem sits straight and is not pinched by the bead.
If the vehicle has a tire pressure monitoring sensor, the stem and sensor may need replacement together during a wheel change. Confirm the sensor type with the vehicle before buying parts, and inspect the stem for air loss after the first few days on the road.
- Replace cracked or aged valve stems
- Check stems sit straight after mounting
- Balance the wheel after tire fitting
- Re-check pressure after the first drives
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31578587300 |
| Series | MR315 |
| Wheel diameter | 17 Inches |
| Wheel width | 8.5 Inches |
| Bolt pattern | 8 on 170 |
| Center bore | 131 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Windowed |
| Finish | Machined |
| Construction | Aluminum |
Vehicle fitment
This wheel is not matched to a specific year, model or trim. Its bolt pattern, center bore, offset and backspacing decide which hubs and vehicles it clears, so compare them with your vehicle before choosing it.
Compare the 8 on 170 bolt pattern and 131 center bore with your hub, and make sure the 0 offset and 4.75 backspacing clear your brakes and suspension. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Zero offset places the mounting face at the wheel centerline, which changes how the wheel sits in the fender compared with a positive-offset wheel. Test-fit with the tire you plan to run and check clearance at full steering lock. A rubbing wheel can wear tires and damage suspension parts, so finish these checks before the vehicle is driven.
What’s included
Only the wheel is covered. Tires, lug nuts and valve stems need to be sourced separately.
Not included: Tires need to be fitted separately, and lug hardware needs to be arranged separately as well.











