Overview
The Method Race Wheels MR605 NV in 20×12 with an 8 on 6.5 bolt pattern, part number MRWMR60521280952N, is a bronze aluminum windowed wheel from Method’s 600 Series. It is an evolution of the MR305 NV with more aggressive dimensions, and the 20×12 size is built for a deep-dish look.
The one-piece wheel uses Method’s signature Street-Loc lip and carries a 5.25 inch lip on this 20×12 version. It is rated at 3640 lbs for 8 lug applications and suits lifted trucks, Jeeps and SUVs. No specific vehicle years, models or chassis codes are named, so confirm fit before ordering.
Key features
- Street-Loc lip, standard on the one-piece wheel, with removable stainless steel bolts around the lip.
- Bolt-on aluminum center ring that houses the center cap.
- Snap-in cap with a raised Method logo for 5 and 6 lug applications.
- Bolt-on cap for 8 lug applications.
- Two massive debossed Method logos around the bolt circle.
- 5.25 inch lip on the 20×12 size; the 20×10 size of the same series has a 3 inch lip.
- Load ratings of 2650 lbs for 5 and 6 lug and 3640 lbs for 8 lug applications.
Before you mount wider wheels
A wheel with a deep dish face and a wide lip changes where the tire sits relative to the fender, the control arms and the brake caliper. Before mounting, set the wheel on the hub without the tire, then rotate it through full steering lock and check for contact. On lifted trucks and Jeeps, suspension travel is the key test, so cycle the suspension slowly and look for rub points on the lip and the inner barrel.
Lug count and center hardware should be settled before the wheel goes on. Make sure the lug nuts seat correctly against the wheel’s seat type, and torque them in a star pattern. Retighten after the first few drives, because new wheels can settle against the hub face. Inspect the lip and bolts at each tire rotation and after rough trail use, looking for cracks, bent lip sections or loose stainless steel bolts.
- Test-fit with the planned tire before the first drive
- Check lug count against the center cap type
- Recheck lug torque after the first few drives
- Inspect the lip after rocks or hard landings
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR60521280952N |
| Series | MR605 NV |
| Wheel diameter | 20 inches |
| Wheel width | 12 inches |
| Offset | -52 |
| Center bore | 121 |
| Backspacing | 4.5 |
| Bolt pattern | 8 on 6.5 |
| Finish | Bronze |
| Style | Windowed |
| Construction | Aluminum |
| Lip depth, 20×12 | 5.25 inches |
| Load rating, 8 lug | 3640 lbs |
| Load rating, 5 and 6 lug | 2650 lbs |
| Fitment listed | Universal Fit |
Vehicle fitment
No specific vehicles are named for this wheel. The fitment field reads Universal Fit, but it gives no years, models or chassis codes, so the fitment data cannot confirm a match for any vehicle. Compare the 8 on 6.5 bolt pattern, -52 offset, 4.5 backspacing and 121 center bore with your vehicle’s specifications.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 5 and 6 lug version uses a snap-in center cap, while the 8 lug version uses a bolt-on cap, so confirm your lug count before fitting the center hardware. The -52 offset and 4.5 backspacing set how far the wheel sits in the wheel well, so check tire and suspension clearance before mounting. Lifted vehicles load their wheels harder, so stay within the rating for your lug count.
What’s included
The wheel comes with its Street-Loc lip, removable stainless steel lip bolts, bolt-on aluminum center ring and center cap design.
Not included: Tires, lug nuts and mounting hardware must be obtained separately.










