Overview
The Method Race Wheels 703 17×8.5 in Bronze, part number MRWMR70378558935, is a 17-inch by 8.5-inch aluminum windowed wheel with a 5 on 150 bolt pattern and an offset of 35. It belongs to the MR703 Bead Grip series and is marketed for off-road applications.
The brand explains that each wheel is engineered for its intended use and validated through Finite Element Analysis and field testing. A 111 center bore and 6.25 backspacing appear in the specifications so buyers can compare them with their hub and clearance.
Key features
- Windowed style on an aluminum wheel
- Bronze finish
- MR703 Bead Grip series
- Offset 35 and 6.25 backspacing.
- Developed with finite element analysis and field testing.
Offset and backspacing in practice
Offset and backspacing are the two numbers that decide where the wheel sits in the wheel well. Mounting face position changes how much tire extends past the fender and how close the inner lip comes to the brake caliper and suspension parts. A wheel that sits too far inward can rub control arms or springs, while one that sits too far out shifts load onto the wheel bearings differently than the hub was built for.
Changing tire width or adding a wheel spacer changes these relationships too. Wider tires push the sidewall outward, and spacers move the whole wheel out. Re-check clearance at full steering lock and with the suspension compressed after any change. A windowed face leaves more of the wheel open to mud and rock, so keep the bronze finish clean and inspect it after rough runs.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70378558935 |
| Series | MR703 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 5 on 150 |
| Offset | 35 |
| Center bore | 111 |
| Backspacing | 6.25 |
| Style | Windowed |
| Finish | Bronze |
| Construction | Aluminum |
Vehicle fitment
Universal Fit is the only fitment category. Compare the 5 on 150 bolt pattern, offset 35 and center bore 111 with your hub before ordering.
Different offsets or backspacing in the 703 line are separate part numbers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 111 center bore must suit the hub, and 6.25 backspacing changes how far the wheel sits inside the fender, so check clearance. Mount only after the bore and clearance have been confirmed.
What’s included
This package covers one bronze wheel. Plan for tires and mounting hardware separately.











