Overview
The Method Race Wheels MR315 17×8.5 in Matte Black is a 17-inch aluminum wheel with an 8 on 6.5 bolt pattern and part number MRWMR31578580525. It has windowed styling, a matte black finish, an 8.5 inch width, 25 offset and 5.8 backspacing.
Method Race Wheels built the MR315 series for off-road racing use. Each design was modeled with finite element analysis and then field tested, with the goal of lower weight and greater strength. Compare the figures in the specifications table with your hub before mounting.
Key features
- Windowed MR315 design in a 17 inch diameter
- Matte black finish on aluminum construction
- 8.5 inch width with 25 offset and 5.8 backspacing
- 8 on 6.5 bolt pattern with a 131 center bore
- Developed with Finite Element Analysis and field testing.
- Designed to be lighter and stronger.
Choosing tires for this wheel
Tire width, overall diameter and sidewall shape all change how close the tire sits to the fender and suspension. Pick a size approved for your vehicle, then test-fit before driving. A wider tire on a 8.5-inch rim may need more clearance at full lock.
Tire load and speed ratings matter for off-road loads, so choose a tire built for the weight of your vehicle and the terrain you drive. Check the bead seat carefully when mounting, since a poor seal can leak on an aluminum rim.
After mounting, have the assembly balanced to prevent vibration at speed. Recheck balance and tread wear if you notice a new vibration, and rotate tires on a regular schedule so wear stays even across the set.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31578580525 |
| Series | MR315 |
| Wheel diameter | 17 Inches |
| Wheel width | 8.5 Inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 131 |
| Offset | 25 |
| Backspacing | 5.8 |
| Style | Windowed |
| Finish | Matte Black |
| Construction | Aluminum |
Vehicle fitment
This wheel is not matched to a specific vehicle. The 8 on 6.5 bolt pattern and 131 center bore must match the hub, while the 25 offset and 5.8 backspacing determine how the wheel clears brakes and suspension.
Check the hub pattern before anything else, then review offset clearance at the fender. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 25 offset moves the mounting face outward compared with a zero-offset wheel, which changes how the wheel sits against brake parts and the fender. Test-fit the wheel with the planned tire and check clearance at full steering lock. Any contact between the wheel and a fixed part should be corrected before the vehicle is driven on the road.
What’s included
Only the wheel is covered here, so tires and lug hardware must be arranged separately.
Not included: Tires and lug nuts must be obtained separately.









