Overview
The Method Race Wheels 701 Trail Series 18×9 wheel in matte black, part number MRWMR70189058525, is a one-piece cast aluminum off-road wheel with a 5 on 150 bolt pattern. It belongs to the brand’s MR701 Bead Grip series and is built for trail and off-road driving.
The 701 was built for off-road racing, and it carries a Bead Grip design meant to engage the tire bead seat. That grip helps when running lower air pressures, a common choice on rough terrain. The wheel is 18 inches in diameter and 9 inches wide, with a windowed style.
The wheel suits drivers who air down for loose or rocky ground.
Key features
- One-piece cast 356 aluminum construction with T6 heat treatment
- Bead Grip technology that engages the tire bead seat for added grip at lower air pressures
- Reinforced inner lip carried over from the brand’s race wheel design
- Aggressive safety hump on the inner and outer bead seat to help stabilize the tire and resist de-beading
- Windowed style in a matte black finish
- The wheel is designed to reduce weight while increasing strength.
Matching hub dimensions
Hub fit comes down to three numbers: bolt count, bolt circle and center bore. A wheel with the right bolt pattern can still sit off-center if the bore is wrong, which places the load on the studs instead of the hub face. Vibration and loose lug nuts often trace back to that mismatch, so measure the hub before ordering rather than after the wheel arrives.
Hub-centric wheels rely on the hub rather than the lug nuts for alignment. If your hub bore is larger, a centering ring can close the gap, though it should be sized to the hub and checked for a secure fit. Re-torque lug nuts after the first few drives on new wheels, and check them again after tire changes.
- Measure the hub bore with calipers before ordering
- Use centering rings only when they fit the hub snugly
- Recheck lug torque after the first trail runs
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70189058525 |
| Series | MR701 Bead Grip |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 150 |
| Center bore | 111 |
| Offset | 25 |
| Backspacing | 6 |
| Construction | Aluminum, one-piece cast 356 with T6 heat treatment |
| Style | Windowed |
| Finish | Matte Black |
Vehicle fitment
No make, model or year is attached, and the wheel carries a Universal Fit designation. Match the 5 on 150 bolt pattern, 111 center bore and 25 offset to your own hub, and check clearance to brakes and suspension.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Offset 25 and backspacing 6 control where the tire sits relative to the hub, so check tire width against the 9 inch rim width and confirm clearance to brakes and suspension before mounting. Center bore 111 should be compared with your hub so the wheel fits without relying only on lug nuts. Confirm the seat type your studs need before mounting.
What’s included
Only the wheel is covered here. Lug nuts, center caps and tires are not part of this wheel.
Not included: Plan for tires and lug hardware before mounting the wheel.









