Overview
The Method Race Wheels 313 in 17 by 8.5 inches with a 6 on 5.5 bolt pattern is a gloss titanium aluminum wheel, part number MRWMR31378560800. It has an offset of 0 and backspacing of 4.75, and it is marked Universal Fit without naming a vehicle.
Method Race Wheels builds its wheels for the off-road racing community, and the brand says each design is engineered for its intended use and checked with finite element analysis and field tests. The stated objective is a wheel that is lighter and stronger. Builders who already run a 6 on 5.5 pattern can use this gloss titanium MR313 to compare sizes.
Key features
- MR313 style, 17 by 8.5 inches
- Gloss titanium finish
- 6 on 5.5 bolt pattern
- Aluminum construction
- Offset 0 and backspacing 4.75
- Weight reduction and added strength are the goals of this design.
Hub-centric rings explained
A hub-centric ring fills the gap between the wheel’s center bore and the hub’s pilot diameter. It carries part of the vehicle’s weight, so the lug studs are not forced to center the wheel. A ring should be sized for the bore on this wheel and the hub on your vehicle, and it should sit flush against the hub face without binding.
Rings are often made from plastic or aluminum, and each material has a different load rating and temperature range. Check that the ring’s inside diameter matches the wheel bore and that its outside diameter fits the hub. A ring that is too thin or undersized can let the wheel shift, causing vibration that is hard to trace. Recheck the seating after the first few drives.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31378560800 |
| Style | MR313 |
| Construction | Aluminum |
| Finish | Gloss Titanium |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Offset | 0 |
| Backspacing | 4.75 |
Vehicle fitment
No vehicle is named for this wheel, which is marked Universal Fit. A 6 on 5.5 pattern narrows the hub match, but the 0 offset and 4.75 backspacing still need checking against the wheel well and brakes of the vehicle you plan to use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the hub pattern is exactly 6 on 5.5 before mounting, then test-fit to confirm caliper and fender clearance. Because the offset is 0, any spacer added later changes the wheel position, so recheck clearance after each change.
What’s included
Compare the package contents with your installation plan before starting.
Not included: Lug nuts and center caps are a separate purchase, as are tires.









