Overview
Method’s 308 Roost wheel in Matte Black, part number MRWMR30878550500, is a 17×8.5 aluminum spoke wheel with a 5 on 5 bolt pattern and a 72 center bore. The black finish gives the spoke design a subdued look for an off-road wheel.
Offset is 0 and backspacing is 4.75. Method’s stated design goals for the series are reduced weight with higher strength, and each design was tested in the field before release.
Key features
- Matte Black finish on a spoke-style aluminum wheel
- 5 on 5 bolt pattern and 72 center bore
- 17 inch diameter and 8.5 inch width
- Zero offset with 4.75 backspacing
- Part of the MR308 Roost series
- Built for off-road racing use.
Hub fit and centering
Wheel fit begins at the hub, so the center bore and bolt pattern need to match the vehicle before anything else. A bore larger than the hub hangs the wheel on the lugs alone, which can cause vibration at speed. Hub-centric rings fill that gap and carry the load onto the hub, which keeps the wheel centered and the lug nuts under even pressure.
Offset and backspacing decide where the wheel sits in the fender and how close it comes to the brakes and suspension. Zero offset puts the mounting face at the centerline, which can change steering feel and rub limits compared with a wheel that sits further in. Check clearance at full steering lock and with the suspension compressed.
- Confirm bore and bolt pattern against the hub
- Use hub-centric rings when the bore is larger
- Test clearance at full lock
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30878550500 |
| Series | MR308 Roost |
| Style | Spoke |
| Finish | Matte Black |
| Construction | Aluminum |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 72 |
| Offset | 0 |
| Backspacing | 4.75 |
Vehicle fitment
This Roost wheel carries no vehicle years or models. Measure your hub against the 5 on 5 pattern and 72 center bore, then compare offset 0 and backspacing 4.75 with your vehicle’s specifications.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 72 center bore must match the hub or be bridged with hub-centric rings. Test tire and suspension clearance after mounting, since zero offset places the face at the centerline.
What’s included
The wheel in Matte Black. No center cap or hardware is listed.
Not included: tires, since none are mentioned with this wheel.











