Overview
The Method Race Wheels 704 Trail Series 17×8.5 in matte black, with an 8 on 6.5 bolt pattern, is part MRWMR70478580500, a one-piece cast aluminum wheel for off-road trail use. It has 0 offset, a 131 center bore and 4.75 backspacing, with a windowed style. No vehicle is named for this wheel.
The 704 is built around MR704 Bead Grip, patent-pending technology that engages the tire bead seat to add grip at lower pressures. It has a reinforced inner lip from race wheel design and a safety hump on each bead seat to help resist de-beading. Each wheel was refined with Finite Element Analysis and field testing.
Key features
- Cast 356 aluminum, one piece, with T6 heat treatment
- Patent pending Bead Grip design for more tire grip when running lower air pressures
- Reinforced inner lip from race wheel design
- Safety hump on inner and outer bead seats to help stabilize the tire and reduce de-beading risk
- Matte black finish with a windowed style
- Finite element analysis and field-tested design.
Lower pressure and trail driving
Lower pressures change how the tire loads the rim, so bead grip matters more on trail setups. The tire bead rides on a seat that the wheel shapes, and at low pressure the tire can roll off that seat under hard cornering. The reinforced inner lip and the safety hump on each bead seat help keep the tire in place when that happens, though they do not replace a properly seated bead.
Eight-lug patterns are less common than five- or six-lug layouts, so the hub is the first thing to measure. Confirm the bolt pattern, center bore and offset against the hub before ordering. Once mounted, check lug torque after the first few trail runs and inspect the tire bead after any hard landing or rock contact.
- Match 8 on 6.5 to the hub before ordering
- Set trail pressure only after the bead seats
- Inspect the lip and bead seat after rock contact
- Plan tires and lug hardware as separate purchases
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70478580500 |
| Series | MR704 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 8 on 6.5 |
| Offset | 0 |
| Center bore | 131 |
| Backspacing | 4.75 |
| Style | Windowed |
| Finish | Matte Black |
| Construction | Cast 356 aluminum, T6 heat treated |
| Fitment field | Universal Fit |
Vehicle fitment
The wheel is Universal Fit, so no single vehicle is named. Match the 8 on 6.5 bolt pattern, 17 inch diameter, 8.5 inch width, 0 offset and 131 center bore to your vehicle’s hub and clearance, and confirm your vehicle’s year, model and trim before ordering.
An 8 on 6.5 pattern is not interchangeable with a 6 on 5.5 hub, so the bolt pattern is the first thing to compare. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bead Grip suits lower tire pressures, so set pressure using the guidance printed for the specific tire. The 0 offset and 4.75 backspacing set where the wheel sits relative to the hub, so check brake and suspension clearance before mounting.
What’s included
The wheel itself, with tires, lug hardware and caps planned as separate items.
Not included: Tires, lug nuts and other mounting hardware are separate parts.














