Overview
The Method Race Wheels 701 Trail Series 17×7.5 wheel, part number MRWMR70177553950, is a bronze windowed aluminum wheel with a 5 on 130 bolt pattern, center bore 78, offset 50 and backspacing 6.2. It is built within Method’s MR701 Bead Grip series for off-road trail use.
The wheel is one-piece cast from 356 aluminum and T6 heat treated. Its patent pending Bead Grip design engages the tire bead seat for better grip at lower air pressures. A reinforced inner lip from race wheel design sits alongside a safety hump on the inner and outer bead seat to keep the tire stable and help prevent de-beading. Finite element analysis and field testing guided the design toward less weight and more strength. It is built for off-road racers and enthusiasts who run trucks and Jeeps hard.
Key features
- One-piece cast 356 aluminum with T6 heat treatment
- Patent pending Bead Grip design for tire grip at lower air pressures
- Reinforced inner lip carried over from race wheel design
- Inner and outer bead seat safety humps against de-beading
- Bronze finish with a windowed style
- Developed through finite element analysis and field tests
Mounting and balance
Balancing a 17-inch wheel with a tire is important for steady highway speed and for reducing vibration on rough trails. Ask the tire shop to balance the assembled wheel, and re-check balance after a tire has been repaired or re-seated.
An offset of 50 pulls the mounting face inward, which changes the tire’s position against the suspension. The 6.2 backspacing measures from that face to the inner rim edge, so a test fit confirms room for the caliper and control arms.
Inspect the bead seats and inner barrel after rough trail runs. Re-torque lug nuts once the wheel has been mounted for a short distance, and check the tire pressure before each trip. Keep the wheel and tire assembly stored upright or flat to prevent bead distortion, and store spare wheels away from heat sources.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70177553950 |
| Series | 701 Trail Series, MR701 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 7.5 inches |
| Bolt pattern | 5 on 130 |
| Center bore | 78 |
| Offset | 50 |
| Backspacing | 6.2 |
| Style | Windowed |
| Finish | Bronze |
| Construction | Aluminum, one-piece cast 356, T6 heat treated |
Vehicle fitment
This bronze 17×7.5 wheel is Universal Fit, so no vehicle is named. The 5 on 130 bolt pattern, center bore 78 and offset 50 determine whether it mounts to a given hub, so measure your hub before deciding.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the wheel for brake caliper and suspension clearance before any tire is mounted, since the 50 offset moves the mounting face inward compared with a zero-offset wheel. Set tire pressure with Bead Grip in mind, since the design is aimed at lower pressures. Wheel and tire assemblies carry load, so have the mounted set inspected before use.
What’s included
Confirm whether lug nuts and center caps are in the box before mounting, since a tire is needed separately.
Not included: A tire, plus any lug nuts or center caps you need.
















