Overview
The Method Race Wheels MR605 NV in 20×10 with an 8 on 180 bolt pattern is finished in matte black. Part number MRWMR60521088524N identifies this windowed aluminum wheel from the 600 Series, which Method describes as an update of its MR305 NV.
The design aims at a deep-dish look with more aggressive dimensions than its predecessor. It suits lifted trucks, Jeeps and SUVs, and it carries the Street-Loc lip with removable stainless steel bolts around the edge.
Key features
- Street-Loc lip on a one-piece wheel with removable stainless steel bolts
- Windowed style with a bolt-on aluminum center ring
- Snap-in cap with raised Method logo for 5 and 6 lug, bolt-on cap for 8 lug
- Two debossed Method logos around the bolt circle
- Load ratings of 2650 lbs (5 and 6 lug) and 3640 lbs (8 lug).
- Offset of -24 with 4.55 backspacing
Lip bolts and edge care
The Street-Loc lip relies on removable stainless steel bolts around its edge. Those bolts hold the lip to the wheel, so they should be checked for tightness before each trip and after the first few drives. Look for threads that strip, corrosion on the bolt heads and any gap between the lip and the barrel.
Curb contact and rock strikes usually show up on the lip first. Scrapes, dents or cracks near the lip edge mean the wheel should be inspected before it is driven hard. Clean the lip with a soft brush and mild soap, and keep grit out of the bolt recesses so the fasteners can be removed when needed.
- Check lip bolt tightness before each trip
- Inspect for corrosion on bolt heads
- Look for cracks near the lip edge after rock strikes
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR60521088524N |
| Series | MR605 NV |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Bolt pattern | 8 on 180 |
| Center bore | 124 |
| Offset | -24 |
| Backspacing | 4.55 |
| Lip depth | 3 inches (20×10); 5.25 inches (20×12) |
| Load rating | 2650 lbs (5 and 6 lug); 3640 lbs (8 lug) |
| Style | Windowed |
| Finish | Matte black |
| Construction | Aluminum |
Vehicle fitment
Method marks this wheel universal fit, so it is not matched to a particular year, make, model or trim. The 8 on 180 bolt pattern, 124 center bore, offset -24 and 4.55 backspacing are the match points for any truck, Jeep or SUV you consider, along with clearance around brakes and suspension.
No vehicle is tied to this wheel, and a hub with another lug count or pattern will not fit it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 8 lug version uses a bolt-on cap, while 5 and 6 lug versions use a snap-in cap with a raised Method logo. Confirm your hub’s lug count and center bore before fitting, and check clearance with the tires you intend to run.
What’s included
The center ring and bolt-on cap for the 8 lug version, as Method describes them.
Not included: Tires and valve stems are not part of what Method describes here.










