Overview
The Method Race Wheels 305 NV 16×8 with an 8 on 6.5 bolt pattern, part number MRWMR30568080500, is an aluminum windowed wheel in a black finish. It measures 16 inches in diameter and 8 inches in width, and it carries a 131 center bore for hub fit.
Method Race Wheels describes its MR305 NV line as designed for the off-road racing community, with weight reduction and added strength as design goals. This eight-lug model is listed with an offset of 0 and a backspacing of 4.5, figures worth comparing against your hub before any mounting work.
Key features
- Eight lug holes on an 8 on 6.5 bolt pattern
- Black finish on a windowed design
- Aluminum construction at 16 by 8 inches
- Center bore of 131 and offset of 0
- Backspacing of 4.5
Eight-lug hub fit
Eight-lug wheels spread the clamping load across more fasteners, so the hub face and lug holes must be clean and flat for even seating. Check that the hub is drilled for the 8 on 6.5 pattern and that the center bore is correct for the hub before mounting. A poorly seated wheel can vibrate or work loose over time.
Lug fastener selection matters because the seat type must match the wheel. Keep spare fasteners on hand when running off road, since a single lost nut can overload the rest. Inspect the windowed spokes and hub face for cracks after impacts, and re-check torque after the first few drives.
- Confirm hub pattern and bore
- Keep spare fasteners for trail use
- Inspect hub face for debris
Specifications
| Brand | Method Race Wheels |
|---|---|
| Series | MR305 NV |
| Part number | MRWMR30568080500 |
| Diameter | 16 inches |
| Width | 8 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 131 |
| Offset | 0 |
| Backspacing | 4.5 |
| Style | Windowed |
| Finish | Black |
| Construction | Aluminum |
Vehicle fitment
No specific vehicle is tied to this wheel, so it is a universal fit. Its 8 on 6.5 pattern and 131 center bore are specific, so compare both with your hub before deciding it is the right wheel.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm that the hub is drilled for the same 8 on 6.5 pattern and that the 131 center bore suits the hub face. Eight lug fasteners will be needed to secure the wheel.
What’s included
The entry covers only the wheel. Tires and lug fasteners are not part of this entry and must be sourced separately.











