Overview
The Method Race Wheels 301 The Standard 17×8.5 in machined finish, part number MRWMR30178560325, is a 17-inch aluminum spoke wheel with a 6 on 5.5 bolt pattern and a 108 center bore. It is part of the MR301 The Standard series from Method Race Wheels.
Method Race Wheels created the MR301 line for the off-road racing community. The brand says each design was engineered for intended use, checked with Finite Element Analysis and field testing, and developed to minimize weight while increasing strength. This machined version has an offset of 25 and backspacing of 5.75.
Key features
- 17-inch diameter and 8.5-inch width in aluminum
- Spoke design with a machined finish
- 6 on 5.5 bolt pattern
- 108 center bore
- Offset 25 and backspacing 5.75
- Development based on Finite Element Analysis and field testing, per the brand
Caring for a machined face
A machined finish shows marks more readily than a painted one, so handle the wheel carefully during mounting and storage. Set it face-down on a soft surface and avoid dragging it across concrete, which can scratch the machined areas.
Before seating the wheel, clean the hub face and the back of the wheel so no grit sits between the surfaces. Matching the hub to the wheel center bore, and using a hub-centric ring where needed, keeps the wheel centered and helps reduce vibration over time.
Once the wheel is in service, wash it with mild soap and water and dry it fully. Avoid harsh alkaline or acid cleaners, and inspect the face for chips, bends or cracks after any hard impact.
- Store wheels face-down on a padded surface
- Clean with mild soap and a soft brush
- Inspect after curb strikes or hard impacts
- Keep lug threads clean and free of oil
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30178560325 |
| Series | MR301 The Standard |
| Diameter | 17 inches |
| Width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | 25 |
| Backspacing | 5.75 |
| Construction | Aluminum |
| Style | Spoke |
| Finish | Machined |
| Fitment field | Universal Fit, no vehicles named |
Vehicle fitment
No make, model or year is tied to this wheel, so fit is unconfirmed. Compare the 6 on 5.5 pattern, 108 center bore, 25 offset and 5.75 backspacing with your vehicle’s hub before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Clean the hub face and wheel mounting surface before seating the wheel, so the lugs clamp evenly. Since the bore is 108, check whether a hub-centric ring is needed for your hub before tightening.
What’s included
This item covers one wheel.
Not included: Confirm which lug nuts and center caps you need before mounting.











