Overview
The Method Race Wheels 304 Double Standard MRWMR30478560300 is a 17 inch by 8.5 inch aluminum spoke wheel in a machined finish, with a 6 on 5.5 bolt pattern. It is part of Method’s MR304 Double Standard series, a line built for off-road use. It is not tied to a particular vehicle, so the hub match comes first.
Method says each wheel was engineered with finite element analysis and tested in the field, with the aim of reducing weight while increasing strength. The 108 center bore, 0 offset and 4.75 backspacing determine how the wheel meets your hub and how much clearance you need inside the fender, so compare those figures before anything else.
Key features
- Aluminum spoke design in a machined finish
- 17 inch diameter with 8.5 inch width
- 6 on 5.5 bolt pattern and 108 center bore
- Zero offset with 4.75 backspacing
- Part of the MR304 Double Standard series
- Finite element analysis and field testing shape the design.
- The design aims for less weight and more strength.
Zero offset on the road
A zero offset places the mounting face on the wheel’s centerline, which shifts the tire’s position relative to the suspension compared with positive or negative offsets. Steering feel and scrub radius change with that shift, so expect some difference after the switch. Clearance checks should be done with the tire you actually plan to run, at both straight-ahead and full lock.
Lug nut seat type and torque affect how well a wheel stays tight on a 6 on 5.5 hub. Torque in a star pattern, recheck after the first short drive, and inspect the studs for thread damage. Keep the vehicle on stands during all of this work, and wipe the hub face clean before the wheel goes on.
- Test clearance with the planned tire
- Torque lug nuts in a star pattern
- Recheck nut torque after a short drive
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30478560300 |
| Series | MR304 Double Standard |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Machined |
| Wheel diameter | 17 Inches |
| Wheel width | 8.5 Inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | 0 |
| Backspacing | 4.75 |
Vehicle fitment
This wheel is not tied to a specific vehicle. A wheel sized for a 6 on 5.5 hub only fits hubs and wheel wells that match its numbers, so compare the bolt pattern, center bore and offset with your own vehicle. Confirm the year, model and trim suit your vehicle before ordering.
Other sizes and bolt patterns in the MR304 Double Standard series are separate fitments and are not covered by these figures. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the 6 on 5.5 pattern and 108 center bore match your hub before mounting, and confirm that the 0 offset clears your brake calipers and suspension. Choose lug nuts that suit this wheel’s seat type. Keep the vehicle on stands rather than a jack alone while you work.
What’s included
This entry covers one 17 x 8.5 inch wheel in machined finish. Check the package contents against your installation before starting, including the number of wheels, tires and lug nuts.
Not included: Confirm tires, lug nuts and center caps before mounting.










