Overview
The Method Race Wheels MR315 in Machined Clear Coat is a 17 inch aluminum wheel with an 8 on 6.5 bolt pattern, part number MRWMR31578580325. It has an 8.5 inch width, an offset of 25 and a backspacing of 5.8, in the windowed MR315 design.
Method Race Wheels describes its wheels as engineered for their intended use, with designs checked through finite element analysis and field tests. An offset of 25 places the mounting face further outward than a zero-offset wheel of the same width, which changes clearance at the suspension and brakes. Backspacing of 5.8 is the second measurement to compare against your current setup.
Key features
- Machined clear coat finish over aluminum construction
- 8 on 6.5 bolt pattern
- 17 by 8.5 inch size
- Offset 25 and backspacing 5.8
- Windowed MR315 style
Clear coat care and checks
A machined clear coat finish is a layer over the metal, and its appearance depends on keeping grit and brake dust off it. Wash the wheel with a soft brush and mild soap, avoiding wire brushes that can mark the cut surfaces. After tire service, look at the bead seat and face for scratches, since those spots are where corrosion tends to begin.
Hub fit and bolt pattern come before cosmetics. Compare the hub bore with the center bore, and use hub-centric rings if the bore is larger than the hub. Choose lug hardware that suits an 8-stud pattern. Recheck torque after the first few drives, and inspect the spokes and bead area after any hard impact.
- Wash with soft tools and mild soap
- Check the bead seat after each tire change
- Confirm hub bore before choosing rings
- Re-torque lug nuts after the first few drives
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31578580325 |
| Series | MR315 |
| Style | Windowed |
| Finish | Machined clear coat |
| Construction | Aluminum |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 131 |
| Offset | 25 |
| Backspacing | 5.8 |
Vehicle fitment
This wheel carries a universal fit label, with no make, model or year matched to it. It is therefore not fitted to any particular vehicle by default.
Check the 8 on 6.5 pattern, center bore 131, offset 25 and backspacing 5.8 against the specifications for your vehicle’s wheel position.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the hub bore with the 131 center bore. A bore larger than the hub calls for hub-centric rings. Use lug hardware that suits an 8-stud pattern, and tighten it to the torque value for your vehicle.
What’s included
Lug nuts and center caps are not confirmed as included, so check the package contents before ordering.
Not included: Tires.









