Overview
The King Shocks 25001-171A is a pair of 2.5 inch rear piggyback reservoir shock absorbers for the 2005 to 2017 Ford F-250 and F-350 Super Duty. Each shock uses a monotube body with a compression adjuster and a separate piggyback reservoir, and the kit is sold as a pair with a quantity of 2 per pack.
A piggyback reservoir is a fluid chamber mounted alongside the shock body, which adds fluid capacity for the damper. This kit is tuned to these trucks, with a damping curve and spring rate developed through real-world testing. It replaces the stock rear shocks at stock height. Separate custom kits are offered for trucks with lifted aftermarket suspensions.
Key features
- Rear driver and passenger side shocks, sold as a pair
- Monotube body with a piggyback reservoir
- Compression adjuster for adjustable damping
- Hard anodized 6063 aluminum alloy body
- Heat treated 6061 aluminum alloy piston
- Rulon composite wear bands
- Bolt-on design for stock ride height
Adjusting compression on the road
Compression damping controls how fast the shock resists being pushed in, which shapes how the truck feels over sharp bumps and braking dips. A firmer setting can help control body motion when carrying a heavy load or towing, while a softer setting smooths ordinary pavement. Make small changes and drive a familiar route before changing again.
Record where the knob sits before adjusting, so you can return to a known setting. Compression is not a substitute for correct spring rate or load rating; if the rear sags or bottoms out, check the springs and load first. Use the same setting on both rear shocks so the truck tracks evenly.
- Note the starting knob position
- Adjust in small steps
- Keep both sides on the same setting
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-171A |
| UPC | 70000703602 |
| Position | Rear, driver and passenger side |
| Quantity | 2 per pack |
| Body diameter | 2.5 in |
| Compressed length | 18.346 in |
| Extended length | 28.097 in |
| Reservoir | Piggyback |
| Adjustment type | Compression adjuster |
| Construction | Monotube |
| Body material | Hard anodized 6063 aluminum alloy |
| Piston material | Heat treated 6061 aluminum alloy |
| Wear bands | Rulon composite |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the 2005 to 2017 Ford F-250 Super Duty and Ford F-350 Super Duty, in the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT trims.
Ford F-150 and other Ford models are not covered. Super Duty model years before 2005 or from 2018 onward fall outside this fit. Match your year, model and trim to the fit before buying.
Installation notes
It is an easy bolt-on swap for stock height. Compare the compressed length of 18.346 in and extended length of 28.097 in with the rear shocks you are removing before installing. Support the truck securely on stands before removing either rear shock.
What’s included
Two rear shock absorbers with piggyback reservoirs, one for each side, sold as a pair (quantity 2 per pack).
Not included: Check the package contents against your installation before starting.









