Overview
The King Shocks BS2041 is a mounting sleeve for King bump stops. It holds the bump stop body in place at its mounting location and gives a secure mount without pinching the body. It fits 2.0 and 2.5 inch diameter bump stop bodies.
King bump stops come in stroke lengths from 2 to 4 inch to suit different mounting locations. The sleeve is universal fit, so check the mounting location and bump stop size before using it on a specific suspension. A sleeve that is too tight can pinch the body, and one that is too loose lets the stop move, so check the fit on the truck before use.
Key features
- Mounting sleeve for King bump stop bodies
- Secure mount without pinching the bump stop body
- Fits 2.0 and 2.5 inch diameter bodies
- Schrader cover mounts to the housing rather than the valve
- Single bolt design with a nylon contact pad
Sleeve Fit and Stop Height
A mounting sleeve holds a bump stop body in a fixed position, so its fit affects how the stop works. A sleeve that grips too tightly can distort the body, while one that is loose lets the stop shift under load. Before installing, check the sleeve against the bump stop body diameter and the mounting location on the truck.
Set the stop height with the suspension at its normal ride position, then check the engagement at full compression. The contact pad should meet the housing squarely. Inspect the sleeve and the cover seal at regular service, and clean grit from the mount so dust does not work into the body.
- Check the sleeve against the body diameter before buying
- Confirm the stop engages at the intended point of travel
- Inspect the cover seal for cracks at service
Specifications
| Brand | King Shocks |
|---|---|
| Part number | KSTBS2041 |
| Body diameter | 2.0 and 2.5 inch bodies |
| Stroke lengths of the bump stops | 2 to 4 inch |
| Contact pad | Nylon |
| Fitment | Universal fit. |
Vehicle fitment
The sleeve is universal fit and no specific vehicle is covered. Confirm fit for your vehicle’s year, model and trim before ordering.
A mounting sleeve has to suit the bump stop body and the mounting location on the truck, so confirm the match before ordering.
Installation notes
The sleeve mounts with a single bolt, and the Schrader cover seals against the housing to keep dust and moisture out. Check that the sleeve sits square and does not pinch the bump stop body, and set the stop height so it engages at the intended point of travel.
What’s included
The mounting sleeve. Check the package contents against your installation before starting.









