Overview
The Daystar Stinger Bump Stop, part number KU71089BK, is a tunable bump stop that controls suspension travel on off-road vehicles. Daystar presents it as a stronger, adjustable option compared with conventional bump stops, which it says suit stock street applications better than off-road use.
The Stinger uses EVS microcellular foam in two densities, with a progressive spring rate. Each Stinger holds between one and three EVS foam inserts, so firmness changes by adding or removing inserts and by choosing a density. It is offered in pairs or individually, in two lengths. It is priced at a fraction of nitrogen-charged bump stops and is designed to match their performance.
Key features
- Tunable firmness with one to three EVS foam inserts per stop
- EVS microcellular foam in two densities with a progressive spring rate
- Adjustable piston shaft for further tuning
- Outer shell machined from heavy gauge tubing
- Bronze guide for the piston shaft for long life
- Fully rebuildable design
- Two lengths, offered in pairs or individually
- Works with most racing-style bump can mounts
Tuning the Stinger firmness
Adjustable bump stops let you match firmness to your vehicle’s weight, tire size and terrain. Adding a foam insert raises the resistance near full compression, while removing one softens it. Changing density shifts the feel further, so make changes one at a time and test each setting on the trail before committing to it.
Because a pair should behave the same way, set both stops to the same insert count and density. Check the piston shaft for smooth movement and look at the bronze guide for scoring during service. Choose the length and mount type before installation, and have any weld-on mounting done by a qualified fabricator. Keep a record of settings so you can return to a setup that worked well.
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU71089BK |
| UPC | 814423019965 |
| Type | Urethane Bump |
| Foam | EVS microcellular foam, two densities |
| Foam inserts per stop | One to three |
| Spring rate | Progressive |
| Outer shell | Heavy gauge tubing, machined |
| Piston shaft guide | Bronze |
| Rebuildable | Yes |
| Lengths | Two |
| Packaging | Pairs or individually |
| Mounts | Weld-on and bolt-on, available separately |
Vehicle fitment
It is a universal fit part, designed to adapt to a wide range of vehicles. The right fit depends on the length you select and the mount you use, so confirm both for your application.
Confirm your vehicle’s year, model and trim before ordering. Check the clearance and length against your vehicle before choosing a length.
Installation notes
Because the Stinger works with most racing-style bump can mounts, and weld-on and bolt-on mounts are available separately, choose the mounting style before installation. A weld-on mount needs welding equipment and fabrication skills, while a bolt-on mount uses hardware instead. Confirm clearance at full compression and where the stop contacts the frame or axle. Set both stops in a pair to the same foam count and density so they compress evenly. Have any welding done by a qualified fabricator.
What’s included
Packages come as pairs or singles, so confirm the quantity on your order. Mounts are needed separately.
Not included: Weld-on and bolt-on mounts, which Daystar offers separately.
















