Select your vehicle

King Shocks 2.0 Air Bump Stop Mounting Sleeve – 20AB422-102

King Shocks

Shop King Shocks Bump Stops on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Mounting sleeve for the King 2.0 x 2 in. bump stop
  • Sold as universal fit, with no vehicles named
  • Part number KST20AB422-102

Description

Overview

The King Shocks KST20AB422-102 is a mounting sleeve for the King 2.0 x 2 in. bump stop. It is a part that fits around the bump stop to hold it in place on the shock.

The sleeve fits around the King 2.0 x 2 in. bump stop and holds it in place on the shock. Use it only with a King 2.0 x 2 in. bump stop, and confirm the sleeve matches the bump stop you plan to use.

Choosing the right setup

A mounting sleeve is a small part, but it controls how the bump stop sits on the shock. If the sleeve is worn, the stop can shift, rotate or ride unevenly, which changes how the suspension cushions the final part of its travel. Matching the sleeve to the bump stop size is the first check before installing either part.

Think about the stop you already run before buying. If the bump stop is replaced at the same time, make sure both parts are sized together so the sleeve grips the stop without forcing it. Check the bump stop’s condition as well, since a worn stop can make a good sleeve look like the problem.

  • Measure the existing bump stop before ordering
  • Look for flat spots or cracks on the sleeve
  • Replace both parts together when the stop is worn

Specifications

Brand King Shocks
Part number KST20AB422-102
Product type Bump stop mounting sleeve
Compatible bump stop King 2.0 x 2 in.

Vehicle fitment

It is matched to the King 2.0 x 2 in. bump stop size rather than to a specific vehicle. Confirm fit for your vehicle’s year, model and trim before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

The sleeve is sold on its own. A bump stop isn’t included, so order the King 2.0 x 2 in. bump stop separately.

Not included: The King 2.0 x 2 in. bump stop.

Questions & Answers

What bump stop does the King 20AB422-102 sleeve fit?

It is made for the King 2.0 x 2 in. bump stop. Check your existing bump stop size before ordering, because the sleeve is sized to that stop rather than to a vehicle.

Is a bump stop included with the sleeve?

No. The sleeve is sold separately from the King 2.0 x 2 in. bump stop it works with, so order the stop as a separate item if you don't already have one.

Can the sleeve be used with a different bump stop?

It is made for the King 2.0 x 2 in. bump stop only. A different bump stop is not covered, so match the sizes before ordering to avoid a poor fit.

How do I tell if the sleeve needs replacing?

Check for cracks, deformation or looseness where the sleeve grips the bump stop. If the stop shifts on the shock or the sleeve no longer holds its position under compression, replace the sleeve and inspect the bump stop for wear at the same time.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop King Shocks Bump Stops on Amazon