Overview
The King Shocks 25001-373 is a front remote reservoir shock absorber for the 2018 Jeep Wrangler (JL), in 2-door and 4-door models. It is a gas charged 2.5 Remote Bypass shock built for stock height and for lifts in the 0 to 2.5 inch range.
King custom tuned the damping curves and spring rates for Jeep owners through real-world testing. The zinc plated 2.5 inch outside diameter cylinders hold 7/8 inch hard chromed shafts, and the hard anodized aluminum finned reservoir is a King design. The valving is specific to 18 and later JL models, aimed at performance and comfort.
Key features
- Remote bypass design with a separate reservoir
- Gas charged
- 100% bolt-on installation for stock and lifted applications
- Large zinc plated 2.5 inch outside diameter shock cylinders
- Hard anodized aluminum finned reservoir
- 7/8 inch diameter hard chromed shafts
- Valving specific to 18+ JL models
- Fully rebuildable and serviceable
Remote reservoir mounting
A remote reservoir shock places the gas reservoir on a separate mount, usually with a hose connecting it to the shock body. Choose a route that keeps the hose away from tires, the exhaust and moving suspension parts through full travel. Secure the reservoir with its clamps so it does not rattle or rub during off-road use.
Lift changes affect shock length and angle, so check ride height and clearance after installing any new lift. Gas charged shocks should be handled carefully during service, and worn seals or seepage are signs the unit needs attention. Inspect the hose and reservoir mounts periodically, especially after rough trail use.
- Route the hose clear of tires and exhaust
- Check clearance after any lift change
- Inspect seals for seepage after trail use
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-373 |
| UPC | 700008516731 |
| Shock series | 2.5 Remote Bypass |
| Charge | Gas charged |
| Position | Front |
| Lift range | 0 to 2.5 inch |
| Cylinder outside diameter | 2.5 inch, zinc plated |
| Shaft diameter | 7/8 inch, hard chromed |
| Reservoir | Hard anodized aluminum, finned |
Vehicle fitment
It fits the 2018 Jeep Wrangler (JL) in Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims. Other model years and earlier JK or TJ Wranglers are not covered.
Gladiator and other Jeep models fall outside this fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock bolts on for both stock and lifted applications, with no drilling. Check ride height after installing a new lift, and have the front alignment checked after any change in shock length. Route the remote reservoir clear of moving suspension parts.
What’s included
Check the package contents against your installation before starting.
Not included: A lift kit is not part of this product. The shock is made for use on 0 to 2.5 inch lifts.









