Overview
The King Shocks 25001-184 is an OEM Performance Series front shock kit with a remote reservoir, sold as a pair. It is a bolt-on upgrade for stock vehicles, and a custom length rod end option is available for vehicles with lifted aftermarket suspensions.
The front kit provides an adjustable ride height and a 25% increase in front wheel travel. The shock bodies are 2.5 inch in diameter, with external reservoirs that add fluid capacity and improve heat dissipation. Valve adjustments can be made with simple hand tools, and the kit uses materials and tolerances found on King race shocks.
Key features
- Front position, OEM Performance Series
- Remote reservoir with external reservoir design
- 2.5 inch shock body diameter
- 25% increase in front wheel travel.
- Adjustable front ride height.
- Valve adjustment with simple hand tools
- Bolt-on mounting, sold as a pair
- Maximum tire size 33 inches
Front shock setup and travel
Front shocks control how the truck settles over bumps and how the tires follow the ground under braking and steering. Changing shock length or ride height can shift suspension geometry, so the job is not complete until the alignment has been checked. Wheel travel gains from a front kit also change how the steering and bump stops behave near full compression.
Before fitting, measure your current front ride height and compare it with the stock or custom length option you plan to use. Inspect the upper and lower mounts, bushings and bump stops, since worn parts can make a new shock feel loose. Tire size matters too, because larger tires change rubbing clearance and load on the front axle.
- Measure ride height on level ground before removal
- Inspect bump stops and bushings during the swap
- Recheck tire clearance after full suspension travel
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-184 |
| UPC | 700005378462 |
| Position | Front |
| Shock series | OEM Performance Series |
| Hydraulic / gas charged | Gas charged |
| Reservoir | Remote, external |
| Shock body diameter | 2.5 inch |
| Max tire size | 33 inches |
| Wheel travel increase | 25% (front) |
| Mounting | Bolt-on |
| Fitment type | Direct fit |
| Sold as | Pair |
Vehicle fitment
Fitment depends on your vehicle. Confirm fit for your year, make, model and trim before ordering.
Confirm fit for your vehicle’s year, model and trim before choosing this front shock.
Installation notes
The kit is built for stock vehicles and for lifted trucks that use a custom length rod end, so confirm which version matches your suspension before fitting.
What’s included
A pair of front OEM Performance Series shocks with remote reservoirs.
Not included: Check the package contents against your installation before starting to confirm which rod end version you have.












