Overview
The King Shocks 25001-224 is a Performance Series rear shock kit for the 2007–2017 Jeep Wrangler JK, sold as a pair. It fits 2-door and 4-door Wranglers and bolts in at stock height or on trucks with lifted aftermarket suspensions.
King says each kit was custom tuned for Jeep use, with the damping curve and spring rate developed through punishing real-world testing. The rear shock uses large diameter micro-polished shafts and remote reservoirs with Aeroquip high pressure hoses. The reservoirs are 6063 aluminum alloy, which King says dissipates heat quickly on longer runs.
Key features
- Rear position for 2-door and 4-door Wranglers
- Large diameter micro-polished shafts
- Remote reservoirs with Aeroquip high pressure hoses
- 6063 aluminum alloy reservoirs
- Damping curve and spring rate tuned for Jeep use
- Simple bolt-on installation for stock or lifted trucks
Clearance on a rear lift
Rear shocks work at the axle, where the suspension controls wheel travel, braking loads and the weight of any cargo. When a Jeep carries a lift, the shock operates across a different range of motion, so the mounting angle and the hose path matter more than they do at stock height. Looking at how the shock sits at full droop and full compression helps reveal whether the mounting arrangement has room to move.
Remote reservoirs add an extra point to check, because the hose must stay clear of the frame, the driveline and the spare tire carrier while the axle cycles. Inspect the hose ends, the shock eyes and the bushings after the first few trail trips. Replacing rear shocks in pairs keeps the ride even side to side, and checking tire rub after any change in tire size helps protect the new shocks.
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-224 |
| UPC | 700005378417 |
| Shock series | Performance Series |
| Position | Rear |
| Reservoir | Remote, 6063 aluminum alloy |
| Hose | Aeroquip high pressure |
| Shaft | Large diameter, micro-polished |
| Charge | Gas charged |
| Lift height | w/3-5in Lift Kits |
| Sold as | Pair |
Vehicle fitment
It is a rear kit for the 2007–2017 Jeep Wrangler JK in the Rubicon, Sahara, Sport, Sport S, X, 70th Anniversary and 75th Anniversary trims, in standard and Unlimited bodies.
Wranglers from 2018 onward are not in the listed range, and neither are the earlier TJ and LJ generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It bolts in at stock height. For trucks with a 3-5in lift, the kit covers that lift range. The remote reservoirs and hoses connect to the shock body separately, so account for them when mounting. Work on level ground and secure the vehicle before removing the factory rear shock.
What’s included
A pair of rear Performance Series shock kits with remote reservoirs and Aeroquip high pressure hoses.













