Overview
The XJUNR is a rear unibody tie-in bracket for the 1984-2001 Jeep Cherokee (XJ). It mounts at the rear location and is compatible with the factory receiver.
The bracket adds strength for tough recovery situations. It has a black powder coat finish, is made in the U.S.A., and comes with 1/2 inch hardware.
Key features
- Rear location, direct fit
- Compatible with the factory receiver, per the manufacturer
- Black powder coat finish
- Made in the U.S.A.
- Quality 1/2 inch hardware included
Recovery mounts and frame load
A rear tie-in bracket transfers recovery loads from a strap or chain into the body, so it works only as well as the metal it bolts to. Sudden shock loads put more stress on the bracket and the mounting points than a steady pull, so recovery should be slow and controlled. Check the mounting area for rust before each recovery.
Factory receivers and rear bumpers are designed for specific loads, and a tie-in bracket adds its own. Keep the recovery angle as straight as possible to limit side load on the bolts, and avoid using the bracket as a lift point for the rear of the Jeep.
- Inspect bolts and welds after every recovery
- Avoid shock loads by pulling slowly and evenly
- Look for rust or cracks around the mounting area
- Keep recovery straps rated for the load
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | XJUNR |
| UPC | 700007278711 |
| Location | Rear |
| Finish | Black powder coat |
| Fitment type | Direct Fit |
| Hardware | Quality 1/2 inch hardware |
| Made in | U.S.A. |
Vehicle fitment
The manufacturer fitment list covers the 1984-2001 Jeep Cherokee (XJ) across its Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.
Check year, model and trim against the fit before you order.
What’s included
Quality 1/2 inch hardware is included with the bracket.












