Overview
The JcrOffroad XJUNS-F is a pair of front frame unibody stiffeners for the Jeep Cherokee XJ. They are designed to strengthen the unibody and eliminate flex at the front of the frame.
The stiffeners start just after the front lower control arms and extend up to meet the Front Uniframe Tie-ins. They are CNC cut from 3/16 inch steel and designed for weld-on installation with plug welds, and they keep access to all unibody holes.
Key features
- Strengthens the unibody and eliminates flex
- CNC cut from 3/16 inch steel
- Weld-on design using plug welds
- Retains access to all unibody holes
- Hand built in the USA
Preparing the unibody for welding
Weld-on reinforcement works best when the metal around the mounting points is clean, straight and free of rust. Remove paint and corrosion back to bright metal before fit-up, and check the surrounding unibody for cracks that should be addressed before any reinforcement is added.
Plan the weld sequence so heat does not distort the frame. Tack the stiffeners in place first, check alignment with the front suspension, then weld in short runs and let the metal cool. A reinforcement fitted to a warped frame can lock the flex in place rather than remove it.
- Grind paint and rust back to clean metal
- Check frame alignment before final welds
- Weld in short runs to limit heat
- Inspect plug welds after the first drive
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | XJUNS-F |
| UPC | 780456973379 |
| Material | Steel |
| Thickness | 3/16 inch |
| Construction | CNC cut, weld-on with plug welds |
| Application | Jeep Cherokee XJ |
Vehicle fitment
These stiffeners are for the Jeep Cherokee XJ, covering 1984 to 2001 model years. Confirm your year, model and trim before ordering.
They fit the Cherokee XJ only. They are not made for the Grand Cherokee ZJ or WJ, the Liberty KJ, or the Wrangler YJ and TJ.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a weld-on part, not a bolt-on one, so plan for plug welding at the mounting points. The stiffeners run from just behind the front lower control arms up to the Front Uniframe Tie-ins. Welding on a unibody is best left to someone experienced with structural work.
What’s included
The front frame unibody stiffeners are the item described.
Not included: Front Uniframe Tie-ins, which the stiffeners extend up to meet.









