Overview
The Trail Gear 112036-1-KIT is a Rock Defense front frame reinforcement kit with two frame plates, one for each side of the frame. The plates are precision laser cut from 3/16 inch thick steel and are designed to be welded onto the outside of each side of the frame.
It fits 1986–1995 Toyota 4Runner and Toyota Pickup models. Confirm your year, model and trim before ordering.
Key features
- Two laser cut frame plates, one for each side
- Precision laser cut from 3/16 inch thick steel
- Designed to be welded to the outside of the frame
- Supplied unpainted and lightly oiled
- Front section frame reinforcement
Preparing the frame for plates
Plate work goes best when the frame surface is clean and flat. Grind mill scale, rust and old coatings back to bright metal where the plates will sit, and check that each plate sits flush before any welds are made. Gaps and warped plates cause weak welds and distortion, so take the time to clamp and align both sides carefully.
Weld in short passes, alternating sides so heat does not pull the frame out of line. Let the welds cool, then inspect them for cracks, undercut and porosity before painting. Paint and oil only after the welds are done, since coatings near the weld area can burn and release fumes. Recheck the frame alignment and bolt holes after the first few trips.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 112036-1-KIT |
| UPC | 70000621443 |
| Position | Front |
| Contents | Two frame plates, one per side |
| Material thickness | 3/16 inch steel |
| Finish | Unpainted, lightly oiled |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1986–1995 Toyota 4Runner in DLX and SR5 trims and the 1986–1995 Toyota Pickup in Base, Base Turbo, DLX, SR5 and SR5 Turbo trims.
Trucks from 1979–1985 are not part of this fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The plates are designed to be welded onto the outside of each frame side, so have a qualified welder handle the work if you have no welding experience.
What’s included
Two frame plates, one for each side of the frame.
Not included: paint, since the kit is supplied unpainted, and welding supplies.









