Overview
The JcrOffroad NP231 Transfer Case Skid Plate, part number XJSD-TC231P, protects the transfer case on Cherokee models that use the factory cross member. It provides frame rail to frame rail protection, wider coverage than many transfer case skids.
The plate is made from 3/16-inch thick high strength steel, cut on CNC machines and finished in black powder coat. It does not require any modification to the catalytic converter. Installation involves drilling 10 holes, and all of the hardware is included.
Key features
- Frame rail to frame rail coverage under the transfer case
- 3/16-inch high strength steel
- CNC cut for a consistent fit
- No modification to the catalytic converter
- Works with the factory cross member
- Black powder coat finish
Working with the cross member
A transfer case skid shields the case, its output shaft area, and the shift linkage from rocks and stumps. Because the skid spans frame rail to frame rail, it also takes load from front-to-back impacts, and the cross member under it carries that load into the frame. That is why the cross member’s condition matters as much as the skid itself.
Before drilling, check the cross member for rust, cracks around the mounting holes, and any previous repairs. Look at exhaust and fuel lines for clearance as well, and keep the drill bit square to the surface. After trail use, inspect the skid for bent edges, loose hardware, and paint loss near the mounting points, and replace any fastener that has stretched or corroded.
- Inspect the cross member before drilling
- Check exhaust and lines for clearance
- Re-tighten fasteners after early trail runs
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | XJSD-TC231P |
| UPC | 700007278541 |
| Model reference | NP231 transfer case |
| Material | 3/16-inch high strength steel, CNC cut |
| Finish | Black powder coat |
| Mounting hardware | All hardware provided |
| Installation | Drilling 10 holes |
| Origin | Made in the U.S.A. |
Vehicle fitment
Fitment covers Cherokee vehicles that use the factory cross member, with no model years specified. Check the year and the cross member before ordering.
The skid is matched to the stock cross member rather than an aftermarket one. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires drilling 10 holes. Because the skid is matched to the factory cross member, confirm that the cross member on your vehicle is the stock part before drilling.
What’s included
The transfer case skid plate with all hardware included.
















