Overview
The JcrOffroad TJSDSTRB is a steering box skid in bare steel for the 1997–2006 Jeep Wrangler (TJ) and the 2004–2006 Jeep Wrangler (LJ) Unlimited. It protects the steering box from damage off road, which is the purpose JcrOffroad gives for the part.
The skid is 3/16-inch steel, made in the U.S.A., and it bolts on without cutting or drilling.
Key features
- Steering box skid plate
- Bare steel finish
- 3/16-inch steel
- Bolt-on installation with no cutting or drilling
- Made in the U.S.A.
Caring for bare steel
Bare steel protects well once it is in service, but it rusts when mud, water and road salt sit against it. A skid that is hit by rocks can also chip or bend at its edges, and a bent edge can rub the steering box or its linkage. Wiping off mud after trail use and checking the edges after a hard hit keeps the part doing its job.
Because the skid sits beside the steering box, look at the fasteners at each service and confirm the box still has clearance through full steering travel. If surface rust starts, a rust-inhibiting primer followed by a topcoat slows it. Replacing a badly bent skid is usually simpler than straightening it, since distorted metal may not sit flat again.
- Clean mud and salt off after trail runs
- Check the edges for bends after hard impacts
- Confirm steering box clearance after reinstalling
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | TJSDSTRB |
| UPC | 700007788981 |
| Type | Steering box skid |
| Material thickness | 3/16-inch steel |
| Finish | Bare steel |
| Installation | No cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ) in Unlimited and Unlimited Rubicon trims, and the 1997–2006 Jeep Wrangler (TJ) in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
The list does not include the 2007 and later Wrangler JK or the Jeep Wrangler YJ. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is one steering box skid in bare steel. Confirm the fastener set you need before installing.












