Overview
The ITP Holeshot 20×11-10 is an ATV tire, part number ITPITP211, with a tire width of 11 and a 10 inch rim diameter. It is the Holeshot style, a design that started ITP’s tire line.
The black sidewall and Holeshot style are part of this tire. Check the tread pattern, load rating and construction on the tire you receive before mounting.
Key features
- Holeshot style ATV tire
- Tire width of 11
- 10 inch rim diameter
- Black sidewall
Holeshot style and rim match
A tire’s style name tells you the tread design, but the rim diameter and width decide whether the tire can be mounted safely. Check the bead seat and rim flange before choosing, since a tire slightly off rim size can slip or leak. Pressure is set for the rim and load, so a seated tire should hold air without leaking at the bead.
Riders often replace an ATV tire when the knobs wear down or the sidewall cracks. Before fitting a new Holeshot, inspect the rim for dents and corrosion that could prevent a tight seal. Balancing and replacing the valve stem are good additions when the wheel is off, because they help the new tire run smoothly from the first ride.
- Check rim for dents before mounting
- Replace valve stems when the tire is changed
- Recheck pressure after the first few rides
Specifications
| Brand | ITP |
|---|---|
| Part number | ITPITP211 |
| Size | 20×11-10 |
| Style | Holeshot |
| Tire type | ATV |
| Tire width | 11 |
| Rim diameter | 10 inches |
| Sidewall | Black |
Vehicle fitment
Universal fit applies, but no ATV make, model or years are named, so check the 10 inch rim diameter against your wheels first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 10 inch rim matches before mounting, since the tire size is set by the rim. A tire that does not match the rim diameter should not be mounted.
