Overview
The Trail Gear 140330-1 is an inner axle C-clip, the retaining clip that holds an inner axle shaft in place. It is made for 27 spline axles, so the spline count is the main fit check.
Because this is a small snap ring rather than a full axle assembly, the clip alone names no vehicle, year or trim.
Retaining clip basics
A C-clip sits in a groove at the end of the axle shaft and keeps the shaft from pulling out of the housing. It is a small part, but it carries the shaft’s position, so a clip that is loose, bent or seated in the wrong groove can let the shaft move. Because the clip is sized to the shaft’s groove, the spline count and groove position are the key checks.
When the axle is apart, inspect the groove for wear, rust or a flattened edge. A worn groove can keep a new clip from seating fully. Work carefully when removing the old clip so the shaft is not bent or scored, and seat the new clip so it sits fully in the groove.
- Inspect the shaft groove for wear or rust
- Seat the clip fully in the groove
- Avoid bending the old clip during removal
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 140330-1 |
| UPC | 700007376041 |
| Spline count | For 27 spline axles |
Vehicle fitment
No vehicles are named for this clip. It is tied to 27 spline axles, so compare your inner axle’s spline count before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One inner axle C-clip is named. No other parts are described.









