Overview
The Trail Gear 111306-1-KIT is an 18mm x 120mm greasable bolt, also written M18 x 120mm, sold individually. The product is categorized with leaf spring shackle kits in Trail Gear’s suspension accessory range.
Measure the shackle or bushing location you plan to service before buying. The 120mm length and M18 thread are the figures to compare against the bolt you are removing.
Key features
- Greasable bolt for lubrication after installation
- M18 x 120mm size (18mm x 120mm)
- Sold individually
- Carries a Universal Fit label
Greasing and wear checks
A shackle pivot bolt carries the leaf spring load as the axle moves over bumps, so it sees constant side loading and rotation. Over time the bushing and bolt surfaces wear, which can show up as clunks over rough ground, a loose feel at the steering or a visible gap where the shackle plates meet. Checking the bolt and the shackle bore during routine service helps catch this early.
A greasable bolt lets fresh lubricant reach the bearing surface without taking the shackle apart. Wipe the fitting clean before pumping grease, and watch for old grease or water coming out, which shows the seal is working or that contamination is present. Mud and water are the main reasons shackle hardware corrodes, so greasing after water crossings is a sensible habit.
- Inspect the bolt head and threads for rust or flat spots
- Look for play in the shackle when the vehicle is safely lifted
- Replace worn bushings alongside the bolt
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 111306-1-KIT |
| UPC | 70000621544 |
| Size | 18mm x 120mm (M18 x 120mm) |
| Type | Greasable bolt |
| Quantity | One, sold individually |
Vehicle fitment
It is sold as a universal fit bolt with no vehicle, year or chassis assigned. Confirm fit for your vehicle’s year, model and trim before ordering, and compare the 18mm x 120mm length and M18 thread with the shackle you are servicing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Since the bolt is greasable, add grease through its fitting once it is seated, and repeat that step as part of normal shackle maintenance.
What’s included
One greasable bolt, 18mm x 120mm. No nuts, sleeves or other hardware are described.









