Overview
The Trail Gear 303766-2-KIT is a Longfield U-joint rebuild kit for drive shaft universal joints. U-joints are sized to particular drive shafts, so check the shaft before ordering.
Confirm fit for your vehicle’s year, model and trim, along with the drive shaft size and joint type, before ordering.
Key features
- Rebuild kit for drive shaft universal joints
- Labeled universal fit; check shaft size before ordering.
- Trail Gear part number 303766-2-KIT
Signs of a worn U-joint
A universal joint lets the drive shaft change angle as the axle moves up and down, and it carries torque through that angle every time the vehicle drives. Its small bearings are packed with grease and sealed by caps, so wear usually shows up as clunking, vibration or play at the joint. Because the shaft spins at road speed, a failing joint can become a serious problem if it is ignored.
Joints are often replaced in pairs, since both ends of a shaft wear at similar rates. Before rebuilding, check the yokes for cracks and the shaft for straightness, because a rebuilt joint cannot correct a damaged shaft. Clean the old grease from the joint and keep the bearings aligned as the caps are pressed back in.
- Look for clunking when shifting from drive to coast
- Check for grease leaking from the bearing caps
- Feel for play by rocking the shaft by hand
- Inspect the yokes and shaft for cracks or bends
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 303766-2-KIT |
| Product type | U-joint rebuild kit |
| Application | Drive shaft universal joint |
| Fitment | Universal fit |
Vehicle fitment
Confirm fit against your drive shaft, since U-joint size and type vary by shaft. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rebuilding a U-joint usually means removing the drive shaft and pressing out the old bearing caps. Support the vehicle securely before working under it.
What’s included
Check the kit components against your rebuild before starting, including quantities, bearing caps and seals.










