Overview
The ICON Vehicle Dynamics multi rate leaf spring hardware kit (part number ICO95225H) is a U-bolt and hardware kit for the rear of the 2017–2020 Ford F-150 Raptor. It includes a spring clamp plate and does not include leaf springs.
ICON Vehicle Dynamics describes itself as a performance suspension manufacturer for trucks, SUVs and off-road suspension development, with customer-driven, engineering-oriented manufacturing. The kit is sold as a kit, with the U-bolts and hardware for the rear springs.
Key features
- U-bolts and hardware included
- Spring clamp plate included
- Rear position
- Does not include leaf springs
- Direct fit
Setting up the rear springs
The U-bolts clamp the spring pack to the axle, so the clamp plate and the hardware carry the full load of the rear end. Before tightening, make sure the spring pack is seated on the axle pad and the plate sits square against the leaves. Uneven clamping can cause the pack to shift, squeak or wear the axle seat over time.
Tighten the nuts in a cross pattern and in stages, then recheck them after the first few drives once the springs have settled. Inspect the threads for stretching or damage, and make sure the clamp plate is not cracked. Keeping the hardware snug is a simple way to prevent wander and rattles on rough trails.
- Seat the spring pack before final torque
- Tighten U-bolts in a cross pattern
- Check thread condition at every service
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO95225H |
| Position | Rear |
| Included | U-bolts, hardware, spring clamp plate |
| Leaf springs | Not included |
| Sold as | Kit |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2017–2020 Ford F-150 in the Raptor trim.
The list covers the Raptor trim only, so other F-150 trims and years are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit does not include leaf springs, the springs must be on hand before this hardware is used. Check the spring clamp plate against your spring pack before installing the U-bolts.
What’s included
U-bolts, hardware and a spring clamp plate. Not included: leaf springs.






