Overview
The Warrior 1725 is a pair of U-bolt skid plates for leaf springs, built to protect the spring U-bolts on the Jeep CJ5 and CJ7. It fits the 1976-1983 Jeep CJ5 and the 1976-1986 Jeep CJ7 with named trims. It is not made for vehicles with a Dana 44 rear axle.
Each plate uses a screw-in shock stud. If the stud bends, it can be unscrewed and replaced, so the entire skid plate does not need replacing. Warrior presents this as its own design improvement for the U-bolt skid plate.
Key features
- Protects leaf spring U-bolts
- Screw-in shock stud that can be replaced if bent
- Black powder coat finish
- Comes as a pair
- Not for Dana 44 rear axle
Leaf spring and U-bolt care
U-bolts clamp the leaf springs to the axle, and skid plates sit on the axle side to protect them from rock and debris. Over time the nuts can loosen under load, so the U-bolts need regular checks. Look for threads that are stretched, cracked or deformed, since a worn U-bolt can lose clamp force and let the spring shift.
The screw-in shock stud is part of the mount, so inspect it along with the plate. A bent stud can pull at the plate and change how the shock works, so swap it when it shows a bend. Keep the powder coat in good condition on the plate, since bare steel rusts quickly in mud and road salt.
- Re-torque U-bolt nuts after the first drives
- Check the shock stud for bends
- Touch up chipped powder coat to slow rust
Specifications
| Brand | Warrior |
|---|---|
| Part number | 1725 |
| UPC | 63414617250 |
| Finish | Black powder coat |
| Quantity | Pair |
| Shock stud | Screw-in, replaceable |
| Axle exclusion | Dana 44 rear axle |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1976-1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited and Renegade) and the 1976-1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade).
Vehicles with a Dana 44 rear axle are not covered by this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The plates mount to the leaf spring U-bolts and use the screw-in shock stud, so check the stud is fully seated before the vehicle is driven.
What’s included
The part comes as a pair of U-bolt skid plates with the screw-in shock studs attached.








