Overview
The Warrior 1791 is a universal U-bolt plate, part number 1791, for 4-wheel drive applications. Warrior makes its universal U-bolt plates from steel with a black powder-coat finish, in a standard 1/4 inch thickness and a heavy-duty 3/8 inch thickness. Confirm whether part 1791 is the standard or heavy-duty thickness before ordering.
Key features
- Steel construction
- Black powder-coat finish for lasting durability
- Standard plates are made for 2.5-inch spring widths
- Heavy-duty plates are also offered for 3-inch spring widths
Choosing the right thickness
A universal U-bolt plate sits between the axle and the leaf spring, and it works with the U-bolts to hold the axle in position under load. Because the plate has to match the spring width, measure the spring before choosing a plate. A mismatch can leave the plate seated unevenly, which puts extra stress on the U-bolts and the spring pack. Check the axle and spring seats for wear before fitting a new plate, since a worn seat can let the plate shift.
Heavier loads and rough trail use put more strain on the plate, so the thicker option is often picked for demanding setups. Replace the U-bolts and nuts at the same time as the plate, and clean the mating surfaces of rust and debris so the plate seats flat. Keep the powder-coat finish intact where possible, since bare steel rusts faster.
- Tighten nuts evenly in a cross pattern
- Re-check torque after the first few drives
- Inspect for cracks around the bolt holes
Specifications
| Brand | Warrior |
|---|---|
| Part number | 1791 |
| UPC | 63414617910 |
| Material | Steel |
| Finish | Powder-coated black |
| Thickness | Standard 1/4 inch or heavy-duty 3/8 inch |
| Spring width | 2.5 inch (standard), 3 inch (heavy-duty) |
| Application | 4-wheel drive |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit plate, so it is not tied to a specific year, make or model. Match the plate to your spring width and the thickness you need before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the spring width before choosing a plate. Standard plates are made for 2.5-inch springs, and the heavy-duty option is made for 3-inch springs.
What’s included
Check the package contents against your installation before starting, including the number of plates you need for your setup.








