Overview
The ICON Vehicle Dynamics ICO59923P is a rear VS 2.5 RXT Series remote reservoir shock set for the 2007 to 2021 Toyota Tundra. It is a monotube design with a remote reservoir, and it is a direct fit for the rear position.
ICON configures its bypass shocks for each application in length and lets the owner tune the ride through the bypass valves. The company describes these shocks as 100 percent rebuildable and 100 percent revalveable, so the damping can be serviced or changed over time by a qualified shock technician.
A 6061 billet aluminum manifold sits a few inches below the top cap and forms an internal bump zone. The bump zone adds damping force when the suspension compresses at high velocity, which helps prevent harsh bottom outs during hard use.
Key features
- Rear position with remote reservoir design
- Externally adjustable bypass valve with 28 settings of compression and rebound
- No tools required to change the bypass valve setting
- 6061 billet aluminum manifold forming an internal bump zone
- Added damping force at high compression velocity
- 100 percent rebuildable and revalveable
Remote reservoir checks
A remote reservoir moves the gas and fluid chamber away from the shock body, which gives the shock more room to shed heat on long descents or rough trails. The reservoir hose and its fittings need regular attention because they are the most exposed part of the setup. Routing matters too. The hose should clear the frame, the fender edge and the tire at full compression, and it should not rub on any suspension component.
Shock performance depends on the bypass settings and the valving underneath them. Small changes with the bypass valve are the simplest way to adjust the feel, while valving changes need a qualified shock technician. Inspect mounting bushings and hardware after the first few trail runs, since new shocks can settle into their mounts.
- Look for oil residue at the reservoir fittings
- Check hose routing at full compression
- Re-torque mounting hardware after initial use
- Inspect the bump zone area for dents or leaks
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO59923P |
| Shock series | VS 2.5 RXT Series, RXT Monotube |
| Shock type | Reservoir |
| Adjustment | Bypass valve, 28 compression and rebound settings |
| Manifold | 6061 billet aluminum |
| Hydraulic or gas charged | Gas charged |
| Location and position | Rear |
| Fitment type | Direct fit |
| Vehicle | Toyota Tundra, 2007 to 2021 |
Vehicle fitment
This rear shock set fits the 2007 to 2021 Toyota Tundra across the 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail trims.
Tundras from the 2022 model year onward are not on the list, and other Toyota models are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The set is a rear shock set with remote reservoirs. Compare the kit contents with your installation plan before you begin.

