Overview
The ICON V.S. 2.5 Series PBR Shock Absorber Set, part number ICO217704P, is a rear shock set for 2014–2026 Ram 2500 trucks. It is built for piggyback and remote reservoir applications, which use a 6061 billet aluminum manifold.
The manifold sits a few inches below the top cap and forms an internal bump zone. The bump zone adds about 20% more damping force, which helps prevent harsh bottom-outs and controls the suspension when it compresses at speed. Like the rest of the 2.5 Series, the shock is configured for the application in length and damping tune and can be rebuilt and revalved.
The bump zone formed by the billet aluminum manifold is a feature of this rear set and adds about 20% more damping force. The set is built for piggyback and specific remote reservoir applications, and each shock is configured for its application in length and damping tune.
Owners of a Ram 2500 who run heavy loads should pay attention to the rear mounts, since the set is listed only for that truck within the 2014 to 2026 range.
Key features
- Internal bump zone formed by a 6061 billet aluminum manifold.
- About 20% more damping force in the bump zone.
- Controls fast compression and reduces harsh bottom-outs.
- Configured for the application in length and damping tune.
- Rebuildable and revalveable.
Piggyback vs. remote reservoir setups
Piggyback and remote reservoir shocks differ mainly in where the gas and oil reservoir sits. A piggyback body carries the reservoir alongside the cylinder, while a remote reservoir connects through a hose. Either design can be used on a heavy-duty truck, but the reservoir layout affects clearance at the rear of the frame and how the hose is routed. Check that the reservoir has room to move through full travel before tightening the mounts.
Because the damping is set for each application in length and tune, it is worth matching the shock to how the truck is actually loaded. A truck that tows or carries heavy payloads puts more demand on the rear damping than one used only for daily driving. Shocks are often replaced together with worn bump stops and rear bushings, since a tired bushing lets the shock work at an angle and wears it faster.
Watch for oil streaks on the body, a clunk at the mounts, or a rear end that keeps bouncing after a bump. Those signs point to a shock that has lost damping. Rebuild and revalve options exist, so a worn unit does not always need full replacement, but the seals and valving should be inspected by a shop familiar with the system.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO217704P |
| Shock series | V.S. 2.5 Series PBR |
| Position | Rear |
| Bump zone damping increase | About 20% |
| Fitment type | Direct fit |
Vehicle fitment
Fitment covers the 2014-2026 Ram 2500 across its trim levels, including Big Horn, Laramie, Limited Longhorn, Power Wagon and Tradesman. Ram 1500 and 3500 trucks are not covered.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A rear shock set. Confirm the mounting hardware against your installation before starting.