Overview
The Rancho RS5758 is a front RS5000 Series strut assembly for the 2007–2018 Toyota Tundra. A strut combines the damper and the structural upright of the front suspension in one unit, so it carries more load than a standard shock absorber.
The RS5758 is built for daily driving and trail use on stock and raised trucks. It is a gas-charged, direct-fit unit for the front position. The RS5000 line has been a shock choice for light trucks and sport utility vehicles since 1985.
Key features
- Complete strut assembly for the front position
- Gas-charged construction
- RS5000 Series design for light trucks
- Direct-fit design for the front position
- Suitable for stock and raised Tundra applications
Strut replacement considerations
Replacing a front strut affects more than the damping. The upper mount, bearing and lower connection all control how the wheel moves, so the job often changes the caster and camber settings. For that reason, a front-end alignment is usually needed once the strut is in place, and tire wear should be watched in the first few hundred miles after the swap.
Because a strut carries structural load, its condition matters for steering stability. Look for leaking fluid, clunking over bumps, or a front end that dives during braking. The coil spring, mount and bearing should be inspected at the same time, since a worn part elsewhere can shorten the life of the new strut.
- Plan for a front-end alignment
- Inspect the upper mount and bearing
- Watch for uneven front tire wear
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5758 |
| UPC | 39703575805 |
| Series | RS5000 Series Strut |
| Mounting location | Front |
| Type | Strut assembly |
| Hydraulic type | Gas charged |
| Fitment type | Direct fit |
| Quantity | Each |
Vehicle fitment
It fits the 2007–2018 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims.
Tundra model years outside 2007–2018 and other Toyota models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing a strut usually means disconnecting the upper mount and the lower connection, so a front-end alignment is generally recommended afterward. Check the trim and suspension setup against your truck before buying the replacement unit.
What’s included
One RS5758 strut assembly per unit.
Not included: Check the contents against your installation for coil springs, mounts and hardware before installing.









