Overview
The ICON Vehicle Dynamics K73051 is a Stage 1 suspension system for the 2015–2022 Chevrolet Colorado and GMC Canyon. It uses 2.5 coilovers with internal reservoirs in front and 2.0 Aluminum Series monotube shocks at the rear, and the front height adjusts from 1.75 to 3 inches. The system is built to improve the truck’s capability on pavement and off road.
The kit was developed from a review of each component of the GM platform suspension, with changes made where performance could be gained. The coilovers use ICON engineered Eibach coil springs designed to feel consistent through the range of travel. Rear monotube valving is matched to the truck so it is balanced from front to rear. The kit is designed for 33-inch tires and suits drivers who use the truck on the road and in the dirt.
Key features
- 2.5 coilovers with internal reservoirs
- Front height adjustable from 1.75 to 3 inches
- ICON engineered Eibach coil springs
- 2.0 Aluminum Series monotube rear shocks
- Increases wheel travel by 25 percent
Alignment and tire fit
Raising the front with a coilover conversion changes the front ride height and suspension geometry, so alignment is the first thing to check after the install. Caster and camber settings affect steering feel and tire wear, and an alignment done before the lift is set may no longer be correct. Tire clearance also changes with height, so check it at full lock and over bumps before driving on rough ground.
The coil springs and shocks are tuned together, so the rest of the front end should be in good condition. Tie rod ends, ball joints and bump stops are worth inspecting while the wheels are off. Wear in those parts can make a new coilover setup feel vague, even when the new components are sound.
- Set alignment after the height is final
- Check tire clearance at full steering lock
- Inspect tie rod ends and ball joints during installation
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | K73051 |
| Suspension type | Lift kit, Stage 1 |
| Lift height range | 1.75 to 3 inches |
| Front shocks | 2.5 coilovers with internal reservoirs, included |
| Rear shocks | 2.0 Aluminum Series monotube, included |
| Tire size | 33 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2015–2022 Chevrolet Colorado, including the Base, LT, WT and Z71 trims, and the 2015–2022 GMC Canyon, including the AT4, All Terrain, Base, Denali, Elevation, Elevation Standard, SL, SLE and SLT trims.
The list does not cover the Colorado or Canyon from 2014 or 2023 onward, or the ZR2 trim. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The coilover conversion changes the front ride height and suspension geometry, so have the alignment checked after installation.
What’s included
Front 2.5 coilovers, rear 2.0 Aluminum Series monotube shocks and the ICON engineered coil springs.






