Overview
The ICON Vehicle Dynamics K53062T is a Stage 2 suspension system for the 2010–2024 Toyota 4Runner, including the Limited, Nightshade, SR5, SR5 Premium, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Trail and Venture trims, and for the 2010–2014 Toyota FJ Cruiser Base. The lift is rated from 0 to 3.5 inches, and the kit is designed for 33-inch tires.
The system adds extended travel 2.5 Series coilovers in front, paired with ICON upper control arms that use the patent pending Delta Joint. The longer shocks need these arms, so the two are sold as one system. The rear uses ICON coil springs and 2.0 Aluminum Series shocks. The Delta Joint is a heavy duty, high angle ball joint that combines ball joint durability with the angle of a uniball.
Key features
- Extended travel 2.5 Series coilovers in front
- ICON upper control arms with patent pending Delta Joints
- Delta Joint with a zinc plated housing and grease seal
- Greasable joint design with metal on metal construction
- Rear coil springs with 2.0 Aluminum Series shocks
Maintaining extended travel arms
Extended travel coilovers and upper control arms change the way the front end moves, so the joints carry more of the load at full droop and full compression. Keeping the joints in good shape matters more on a lifted 4Runner that sees trail use than on a stock truck. The arms and coilovers work as a set, so any worn joint or shock affects how the whole front suspension handles.
Plan on greasing the joints on a regular schedule and after long off-road trips, using the grease fittings on the arms. Check the boots and seals for tears, since dirt in a joint speeds up wear. Look for play at the joints, uneven tire wear, or clunking over bumps, which can mean a joint needs service. A post-installation alignment should be set once the lift has settled.
- Grease joints on a regular schedule
- Check boots and seals for tears
- Inspect for play after hard trail use
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | K53062T |
| Suspension type | Lift kit, Stage 2, tubular |
| Lift height range | 0 to 3.5 inches |
| Front shocks | 2.5 Series coilovers, extended travel |
| Rear shocks | 2.0 Aluminum Series |
| Rear lift method | Coil springs |
| Tire size | 33 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2010–2024 Toyota 4Runner, including Limited, Nightshade, SR5, SR5 Premium, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Trail and Venture trims, and the 2010–2014 Toyota FJ Cruiser Base.
The list does not cover the 4Runner from 2009 or earlier, or the FJ Cruiser after 2014. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The extended travel shocks need the ICON upper control arms, so they are installed together. A lift of this size changes the alignment and driveline angles, so have the alignment set after installation.
What’s included
Front extended travel coilovers, ICON upper control arms with Delta Joints, rear coil springs and 2.0 Aluminum Series rear shocks.



