Select your vehicle

ARB 2.5 Inch Lift Kit (Light Duty) – OMEFJC10LKS

ARB 4x4 Accessories

Shop Toyota FJ Cruiser Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • ARB 2.5-inch light duty coil spring kit, part number OMEFJC10LKS
  • Lift height range 2.5 to 3.5 inches
  • Shocks included, coil springs at the rear
  • Fits the 2010-2014 Toyota FJ Cruiser base

Description

Overview

The ARB 2.5 Inch Lift Kit (Light Duty), part number OMEFJC10LKS, is a coil spring lift kit with shocks included. It gives a lift height range of 2.5 to 3.5 inches.

It is set up for light duty use, a lighter load than the heavy load versions.

Key features

  • Light duty coil spring kit
  • Lift height range 2.5 to 3.5 inches
  • Shocks included
  • Coil springs at the rear
  • Direct fit for the listed model

Light duty versus heavy load

A coil spring lift keeps the factory suspension layout and swaps in new springs, so ride height changes without altering the axle or control arm design. Load rating matters more than many buyers expect. A light duty setup suits a vehicle that mostly carries passengers and light gear, while a vehicle that regularly tows or carries a heavy bumper and winch should use a heavier rated kit.

Because the springs and shocks carry most of the load, worn bushings and tired factory parts can change how the new setup feels. Inspect the shock mounts, bump stops and control arm bushings before the lift goes on, and replace any part with play. Tire size and fender clearance also change with lift, so check clearance at full suspension compression. After the first few drives, recheck the bolts on the spring seats and shock mounts.

  • Confirm the load rating before buying
  • Check bump stops after installation

Specifications

Brand ARB 4×4 Accessories
Part number OMEFJC10LKS
UPC 70005790821
Lift height range 2.5 to 3.5 inches
Suspension type Coil spring kit
Rear lift method Coil springs
Shocks Included
Load setup Light duty

Vehicle fitment

It fits the 2010-2014 Toyota FJ Cruiser (Base).

Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

A coil spring lift changes the alignment and driveline angles, so have both checked after installation. Light duty kits are not set up for heavy bumpers or winches, so use the heavy load version if the vehicle carries that equipment.

What’s included

Check the package contents against your installation before starting.

SKU: ARBOMEFJC10LKS Category:

Specification

Shipping weight 100.00 lbs
Package dimensions 22.00 × 20.00 × 18.00 in
brands

Fitment

VehicleYearsTrims
Toyota FJ Cruiser2010–2014Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the OMEFJC10LKS kit include shocks?

Yes. Shocks are included with this light duty coil spring kit, so no separate shocks are needed for the lift covered by this kit.

Which Toyota does the OMEFJC10LKS fit?

It fits the 2010-2014 Toyota FJ Cruiser base. Confirm the year and trim against your own vehicle before ordering, since other FJ Cruiser model years use a different kit.

What lift does the OMEFJC10LKS give?

The kit gives a lift height range of 2.5 to 3.5 inches for this light duty setup. The actual result depends on the vehicle and how it is loaded.

Should the bump stops be replaced with the lift?

Inspect them first. Worn or cracked bump stops can let the suspension bottom out sooner after a lift changes the travel range. Replace any stop that is damaged, and check that it still clears the springs at full compression.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota FJ Cruiser Lift Kits on Amazon