Select your vehicle

Heavy Duty Bar Pin

Currie

Shop Currie Sway Bar Link - Disconnect on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Currie CE-9807BP heavy duty bar pin
  • For the top of a rear shock
  • No vehicle fitment listed

Description

Overview

The Currie CE-9807BP is a heavy duty bar pin for the top of a rear shock, sold as a direct fit part.

Confirm fit for your vehicle’s year, model and trim before ordering.

Key features

  • Heavy duty bar pin
  • Made for the top of a rear shock

Shock mounts and bar pins

The bar pin is the pivot point at the top of a rear shock, so it carries the shock’s load every time the axle moves. Wear here shows up as clunking over bumps, a shock that rattles at the mount, or a bushing that has torn or flattened. Any of those signs calls for inspection before further driving.

Because the pin, bushing and bracket work as a set, check all three together. Replace a worn bushing with the pin, and inspect the bracket for cracks around the bolt holes. Shocks are often replaced in pairs on the same axle so the ride stays balanced.

  • Look for clunking over bumps
  • Inspect bushings for tears or flattening
  • Check brackets for cracks near bolt holes
  • Replace shocks in pairs on the same axle

Specifications

Brand Currie
Part number CE-9807BP
UPC 70000646032
Product type Bar pin
Use Top of rear shock
Fit type Direct fit

Vehicle fitment

This bar pin is made for the top of a rear shock. Fit depends on the shock it is used with and its mount style.

Confirm the shock mount style and the shock it is for before ordering.

Compatible vehicles depend on the shock mount style. Confirm the mount style and your vehicle’s year, model and trim before ordering.

Installation notes

Shocks control wheel movement and vehicle stability, so professional installation is recommended. Support the vehicle on rated jack stands rather than a jack alone, and tighten mounting hardware to the correct torque for your vehicle.

Re-check the hardware after the first miles of driving. Replace shocks in axle pairs where the manufacturer advises it, and have the alignment and ride height checked after any suspension work.

What’s included

Confirm the nuts, washers and other hardware you need before starting the installation.

SKU: CURCE-9807BP Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 4.00 × 4.00 × 4.00 in
brands

Questions & Answers

What is the Currie CE-9807BP?

It is a heavy duty bar pin for the top of a rear shock, sold as a direct fit part.

What vehicle does the Currie CE-9807BP fit?

Fit depends on the shock and its mount style. Confirm fit for your vehicle's year, model and trim before ordering.

What signs show a shock mount needs attention?

Look for cracked or bent brackets, worn or torn bushings, and clunks over bumps. Re-check the hardware after the first miles of driving, and inspect the mounts again after any off-road use.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Currie Sway Bar Link - Disconnect on Amazon