Overview
The TeraFlex Front Sway Bar Quick Disconnect Kit (part number 1764000) lets the front sway bar links release for off-road articulation. When released, the links swing up and out of the way, allowing unrestricted axle movement off-road. The kit is for vehicles with a 0 to 4.5 inch lift.
The kit fits the 2018–2026 Jeep Wrangler JL and the 2020–2021 Jeep Gladiator. With the links connected for street use, they react immediately to sway bar loading, which reduces excess play and improves lateral control and steering response compared with stock rubber sway bar link bushings.
Key features
- Quick disconnect links that swing up out of the way
- Unrestricted axle articulation off-road
- Immediate reaction during sway bar loading
- Improved lateral control and steering response
- Upper link end with an OEM quality polyurethane shoulder ball and socket
- Lower link end with a polyurethane ball that slides over a stainless-steel pin
- Pair of sway bar brackets and pair of frame brackets
- All necessary hardware included
Street manners and articulation
A sway bar resists body roll when the vehicle corners, so its links carry load on every turn. Stock links usually use rubber bushings, which allow some movement before the bar responds. Polyurethane ball joints respond more directly, so the bar reacts sooner when the vehicle leans, which can make steering feel more precise on pavement.
Off the pavement, the links can be released so the axles can travel freely over uneven ground. The stainless-steel pin makes it straightforward to release the link when you reach the trail and to reconnect it afterward. Because the bar is disconnected for articulation, it helps to check the pin and ball joints for wear before each trip.
Polyurethane parts need regular inspection for cracks, grit damage or looseness, and they can be lubricated where the design allows. Keep the brackets tight against the frame and axle, since loose mounts are a common source of noise. If a link feels sloppy after a season of use, replace the worn end rather than adding play to the whole system.
- Look for cracks in polyurethane ball ends
- Keep bracket bolts snug
- Store the pin where it stays clean
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER1764000 |
| Sway bar kit part number | 1753010 |
| Sway bar size | 8.5 in front sway bar quick disconnect kit |
| Lift range | 0 to 4.5 in |
| Sway bar brackets | Pair |
| Frame brackets | Pair |
| Hardware | All necessary hardware included |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2020–2021 Jeep Gladiator in the Overland, Rubicon, Sport and Sport S trims, and the 2018–2026 Jeep Wrangler (JL) in the Rubicon, Sport and Sport S 2-door models and the Unlimited Moab, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S 4-door models.
The list does not include the JK Wrangler, the TJ or LJ, or any Gladiator outside 2020–2021. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit covers lifts from 0 to 4.5 inches, so confirm your lift height before ordering. It includes a pair of sway bar brackets and a pair of frame brackets along with the links.
What’s included
A pair of sway bar brackets, a pair of frame brackets and all necessary hardware for the 8.5 in front sway bar quick disconnect kit (part number 1753010).









