Overview
The Rough Country front sway bar disconnects (part number R/C1029) are quick-release links for 2007–2018 Jeep Wrangler JK models. They are made for vehicles with a 2.5-inch suspension lift and give more off-road articulation when the bar is disconnected.
Pulling the pin disconnects the front sway bar for trail use, and the links fold up and secure out of the way when they are not in use. When the pin is set, the bar stays connected for on-road handling and stability.
Key features
- Front quick disconnects with a pull pin
- Frame brackets included
- Hardware included
- Links fold up and secure out of the way
- Easy bolt-on installation
- Allows greater articulation off-road
Articulation and sway bar use
A front sway bar disconnect lets the axle reach further over uneven ground, which is the main reason to pull the pin on the trail. Because the bar is out of the picture, the vehicle leans more in turns, so the trail setup should be used at low speed. Reconnecting the bar before highway driving keeps the handling the truck was built for.
Pins, bushings and end links wear with use. Clean and inspect the pin after mud or water exposure, and check that the links fold and lock without binding. A pin that sticks can make it hard to disconnect or reconnect the bar when it matters most, so lubricate and inspect it along with the rest of the suspension.
- Reconnect the links before driving on pavement
- Clean and inspect the pin after wet or muddy trips
- Check that the links fold and lock without binding
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C1029 |
| Position | Front |
| Lift required | 2.5 in suspension lift |
| Fitment | Direct fit |
Vehicle fitment
Rough Country lists these disconnects for the 2007–2018 Jeep Wrangler (JK) in 2-door and 4-door form, including the Rubicon, Sahara, Sport, Unlimited X and 70th and 75th Anniversary trims.
Other Jeep generations, including the TJ, LJ and JL, are not on the list, and the links are not sized for other lift heights. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use these links only on a Wrangler JK with a 2.5 in suspension lift, not on a stock-height JK. Brackets and hardware come with the kit.
What’s included
Front quick disconnect links, frame brackets and hardware.









