Overview
The G2 Dana 44 5.13 ring and pinion, part number 2-2033-513, is a 5.13 gear set for Dana 44 axles in the front or rear position. It is engineered for oversized tires and high-performance engines.
A ring and pinion sets the final drive ratio at the axle. With a 5.13 ratio, the pinion turns 5.13 times for each turn of the ring gear, which multiplies the torque reaching the wheels. G2 says these gears use current materials and manufacturing methods for strong and quiet operation.
- 5.13 gear ratio
- Designed for Dana 44 front and rear axles
- Built with current materials and manufacturing methods for strong and quiet operation.
- Built for oversized tires and high-performance engines.
Pairing gears with the right setup
A 5.13 ratio multiplies torque at the wheels, which helps with heavier tires and climbing, while raising engine speed on the highway. The gear set only works well when the carrier, bearings and axle housing match the ratio and the axle model. Check those parts before buying, because the gears alone do not make a complete axle.
Gear mesh and pinion depth set how the teeth wear, so they should be checked by a shop that does this work often. Bearings, shims and seals are usually replaced together with the gears. A new set should be run in gently before towing or hard throttle use, and the gear oil should be changed after the break-in.
- Replace pinion and carrier bearings with the gears
- Check the carrier and housing fit the 5.13 set
- Plan for a gentle break-in period
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2033-513 |
| UPC | 631410094053 |
| Axle manufacturer | Dana |
| Axle type | Dana 44 |
| Axle location | Front and rear |
| Gear ratio | 5.13 |
Vehicle fitment
It is made for Dana 44 axles, so match the axle model and gear ratio to your vehicle before ordering. Gears must suit the carrier and axle housing, so confirm the carrier fits your axle first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear sets need professional setup, including gear mesh and pinion depth, and they require a break-in period after installation.
What’s included
The ring and pinion set is the item described.
Not included: pinion and carrier bearings and installation shims, which a gear install normally requires separately.















