Overview
The G2 Axle and Gear 20-2022-30 is a replacement internal gear kit for rear GM 10 bolt 8.6 inch differentials. It has 30 splines and an open case, and it is intended for repairing worn or damaged gears inside an existing carrier.
The 8.6 inch axle type is specific, so confirm the size on your housing before ordering, since fitment here is by axle type alone.
Key features
- Replacement internal gears for rear GM 10 bolt 8.6 inch axles
- Direct fit for the listed axle type
- Replaces damaged or worn gears without a new carrier
- 30 spline axle spline count
- Open case design
Housing and gear fit
The 8.6 inch rear axle is a common GM 10 bolt housing, and it has a few variants that look similar at a glance. Before any gear work, check the ring gear diameter and the pinion shaft size, since both decide whether a set will mesh properly. Taking a careful measurement now avoids returning a kit after the carrier is already opened.
Gear mesh and backlash are the main setup points for this type of kit. Small changes in shim thickness move the contact pattern, so the new gears should be checked under load before the vehicle goes back on the road. Keep a record of the shim sizes used, which makes any future service faster.
- Measure the housing before ordering
- Check pinion bearing preload during setup
- Use a new crush sleeve if the setup requires one
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 20-2022-30 |
| UPC | 631410093292 |
| Axle type | GM 10 Bolt 8.6 Inches |
| Axle location | Rear |
| Axle spline | 30 splines |
| Case type | Open |
Vehicle fitment
Fitment is given by axle type rather than by car or truck model. This covers rear GM 10 bolt 8.6 inch axles with 30 splines and an open case.
Measure the housing to confirm the 8.6 inch size before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Professional setup is the sensible route for a gear set like this, since gear mesh and backlash must be dialed in during assembly. Expect a break-in period once the carrier is back together.
What’s included
The kit contains internal gears only. Check the package contents against your installation before starting. Use it to replace damaged or worn gears inside a carrier you already own.
Not included: Nothing beyond the internal gear components is supplied with this kit.





